Ashly – ne8250bd


More details

Similar Products

  • Zycoo

SD2140 Network Power Amplifier

The ZYCOO SD2140 Network Power Amplifier is engineered for commercial audio applications demanding higher output power, utilizing advanced Class-D technology to deliver crystal-clear sound and exceptional reliability across large-scale installations. Offering flexible 2×140W or 1×280W bridged output, the SD2140 supports both constant voltage and constant impedance configurations, adapting seamlessly to a wide range of installed audio architectures. As a native Dante endpoint, it integrates directly into Dante-based audio networks for precision-routed, low-latency audio distribution, alongside SIP and ONVIF compatibility, all without requiring additional modules. Input flexibility is equally comprehensive, supporting balanced/unbalanced line, Bluetooth, and network sources. A real-time adjustable mixer and built-in equalizer provide on-the-fly audio control, while scheduled playback via USB storage adds intelligent automation capability. Ideal for large venues, auditoriums, hospitality spaces, and enterprise facilities, the SD2140 delivers a truly feature-rich networked amplification solution at scale.
    Amplifiers
audac-SMA500|audac-SMA500
  • AUDAC

AUDAC – SMA500

The AUDAC SMA500 is a two channel Class-D power amplifier with an output power of 2 x 500 Watt. The WaveDynamics™ DSP processor in combination with the 2.5” LCD display gives an unmatched user experience with intuitive functions overview for easy configuration. Using the optional ANI22 network interface module, connection to any DANTE-powered AV network is made possible, allowing flawless incorporation between hundreds of DANTE enabled products available in the market.
    Amplifiers
  • Dante Ch: 2x2
  • AES67 Enabled
nXp-1.54-front|nXp-1.54-front
  • Ashly Audio

Ashly – nXp1.54d

The nXp1.54d is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions shall include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit