Cart
← Back to Product Catalog

Arista – ARS-1616

I/O Interfaces

Similar Products

cab-4n-dante_600px
  • Peavey MediaMatrix

Peavey MediaMatrix – CAB 4n-Dante

The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB™ 4n continues in the tradition of high-end audio networking set forth by the time-tested CAB Series. In fact, the CAB 4n break-out box was designed specifically for NION®-based systems. The CAB 4n features MediaMatrix®'s Scalable I/O Architecture, with support for the popular line of MediaMatrix I/O modules (up to four modules configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation, IxO). All inputs can be configured in groups of four channels for microphone or line level in any of the available configurations. The CAB 4n features a versatile, performance-oriented GPIO port, which provides configurable contacts for analog, digital and dry contact use. All of the GPIO ports are configurable from the NWare™ software and include an easy DIN rail mounting system for efficient rack wiring and service.
  • Four 16-position front panel rotary switches for unit ID
  • Front panel level meter for each channel
  • 24-bit quantization 64x oversampling
  • 48kHz sample-rate
  • 8 Configurable GPIO pins
  • 4 "Form C" relays with NO and NC connections, contacts rated for 1A
  • Fault relay for hardware indication of unit status, NO and NC connections, contacts rated for 1A
  • Universal power supply (100-240V 50-60Hz)
  • Scalable I/O Architecture
  • Configurable for 16x0, 0x16, 12x4, 4x12 or 8x8 operation
  • Inputs configurable in groups of four channels for microphone or line-level input and line-level output
  • GPIO port
  • GPIO-25 DIN rail breakout panel for external control terminations
  • Fan cooled 2U package with NION cosmetics
  • Front panel audio metering
  • Front panel network status and fault indicators
    I/O Interfaces
See the product
Xilica_Gio_XLR
  • Xilica

Xilica – Gio XLR

True connection unlocks the power of possibilities. With Gio XLR, proprietary analog audio products can be connected into an installed network for centralised management, routing and control. Leveraging Dante audio-over-IP technology, Gio XLR is a dual-gang in-wall endpoint with a single cable installation for both power and data. It offers a 2×2 input/output combination with mic/line switching and software-selected 48V Phantom power, making Gio XLR a versatile bridge between audio and IT.

    I/O Interfaces
See the product
attero-tech-unDX2IO|attero-tech-unDX2IO
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unDX2IO+

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection. The unDX2IO+ replaces the legacy unDX2IO.
    I/O Interfaces
See the product