Cart
← Back to Product Catalog

Apogee – Symphony I/O Mk II Connect 16 MP

I/O Interfaces

More details

Similar Products

Model 395 GPO Interface
  • Studio Technologies

Model 395 GPO Interface

The Model 395 GPO Interface supports two general-purpose output (GPO) signals for a range of applications. The unit is housed in a lightweight, aluminum, tabletop enclosure.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product
dad-dx32r-front
  • DAD

DAD – DX32R

DX32R is your versatile digital audio Swiss knife - an interface and matrix designed for multiple audio applications such as multi-room recording studios, post-production facilities and audio distribution installations. It allows you to route all digital input and output and manage them on a mono channel basis within a single unit or a combination of units.

With near zero latency, the DX32R can be used to expand I/O channel count and interface digital components, providing a high quality bridge between AES/EBU, MADI and the Dante IP audio network.

DX32R include a 384x384 multiplexer, enabling all digital inputs and outputs to be routed in any combination; this enables the unit to also split signals for advanced signal distribution.

The DX32R IP Audio protocol is based on the robust tried-and-tested Dante™ digital audio network technology, and will interoperate with products of other brands that comply with Dante.

The protocol is compliant with the AES67 standard for AoIP. The Dante and NTP IP Audio formats provide fast, flexible, and economical audio routing via IP and are compatible with the AX32 AD/DA converter, and other Dante devices. The IP Audio routing provides low latency, tightly synchronized, transport of uncompressed audio over Gigabit IP Ethernet Layer 3 networks using off the shelf switches, and routers for audio routing via one or more sub-nets.

A total of 512 channels can be routed on a 1 Gigabit network, and more if the network capacity is higher.

DX32R is TCP/IP controlled via one of the two Ethernet ports vi the DADman Control software available for both Windows and OSX.

The routing of the IP audio via Dante is done by using the Audinate Dante controller software.

    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
cadac-mc-dante-network-bridge_600px
  • Cadac

Cadac – CDC MC Dante Network Bridge

The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The CDC MC Dante V2 is a 1U Dante to MegaCOMMS audio network bridge enabling Dante units to be incorporated within a MegaCOMMS audio network. The unit now features A and B Dante ethernet ports with redundancy. It can operate at either 96 kHz or 48 kHz and can handle up to 64 inputs and outputs. The MC Dante also has on-board sample rate conversion for all 128 channels, as well as its own independent word clock with audio connections via co-axial. Dual PSUs come as standard to ensure secure performance in critical network applications. As with the CDC MC MADI unit, the co-axial ports glow either red or blue for Rx (receive) or Tx (transmit) – enabling fast and accurate configuring of the MegaCOMMS network especially in low light.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product