Anubis SPS


More Details

Similar Products

focusrite-A8R_600px|focusrite-A8R_600px
  • Focusrite

Focusrite – RedNet A8R

RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output.  RedNet A8R expands Focusrite’s growing range of 1U Dante interfaces with network and power supply redundancy, providing eight channels of analogue input and output. RedNet A8R offers high quality 192kHz/24-bit A-D and D-A digital conversion with up to 119dB dynamic range, plus two channels of AES/EBU digital I/O, to and from the Dante network. RedNet A8R provides 24-bit conversion at 44.1, 48, 88.2, 96, 176.4 and 192kHz sample rates (remotely-selectable) and includes pull-up/down capability. Electronically-balanced analogue audio I/O is provided on DB25 connectors wired to AES59 specifications. Internal signals are balanced throughout. Inputs and outputs are remotely configurable for 0dBFS= +18dBu or +24dBu signal levels. In addition, two channels of AES/EBU I/O are provided on XLR connectors, with sample rate conversion on the input. The clock source for the unit may be internal, or external via Word Clock or DARS (via the XLR input). RedNet A8R also outputs Word Clock. RedNet A8R features power and network redundancy, with two separate universal (100–240V) PSUs, which include IEC connectors with retaining clips, plus dual network interfaces on locking etherCON connectors. These ports can be configured remotely to Redundant or Switched (daisy-chain) mode. Key Features
  • Eight channels of high-quality line-level analogue I/O
  • 24-bit precision Focusrite conversion up to 192kHz
  • 119dB dynamic range, flat from 20Hz – 20kHz, +/-0.15dB
  • Internally balanced throughout
  • Dante-based remote-controlled audio-over-IP connectivity
  • Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
  • Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU I/O
  • Analogue I/O to AES59 standard on DB25 connectors
  • Comprehensive front-panel indicators
  • Software-based routing and control – no hardware patching required
    I/O Interfaces
  • Dante Ch: 10x10
  • 24-bit
attero-tech-unDX2IO|attero-tech-unDX2IO
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unDX2IO+

The unDX2IO+ Dante™ Audio Interface is a cost effective multi‐IO wall box to add up to two channels (in and out) of Dante audio to an existing Dante-based networked audio system.. The unDX2IO features XLR balanced audio inputs and outputs, switchable mic/line gain and switchable phantom power on the inputs. An additional 2 Balanced line inputs are accessible on side of unit for use with a companion unXP2I passive expansion plate. All inputs and outputs can be used simultaneously and all audio channels are available separately. The unDX2IO+ is designed to fit into most dual gang US junction boxes and is PoE enabled, so all connectivity (power and data) is provided by a single CAT5 cable. CONTROL - Audio flow assignment, input gain and phantom power are all controllable via the Dante network connection. The unDX2IO+ replaces the legacy unDX2IO.
    I/O Interfaces
  • Dante Ch: 4x4
  • 44.1kHz-48kHz
arista-ars-0002-a01
  • Arista

Arista – ARS-0002-A01

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

  • E-Vocal ARS-0002-A00
  • E-Vocal ARS-0002-A01
  • E-Vocal ARS-0200-A00

E-Vocal ARS-0002-A01 converts a Dante ® stream into two channels of analog audio output signals. The two audio signal outputs of ARS-0002-A01 allows Lip-Sync delay of up to 170 ms/ch (fs = 48 kHz) to synchronize the audio stream to the video stream. The delay control switch on the E-Vocal ARS-0002-A01 can add delay in the range of 0~170ms by 32 increments. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

    I/O Interfaces