AMX - DGX1600-ENC

AMX – DGX1600-ENC

Product Information

The new Enova DGX 1600 Enclosure (DGX1600-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content.

The new Enova DGX 1600 Enclosure (DGX1600-ENC) is a Digital Media Switcher that is ready to support 4K and Ultra High Definition (UHD) content. This robust solution includes a NetLinx® NX Integrated Controller, redundant power supplies and can be populated with Enova DGX video input and output boards in addition to optional audio-switching boards. There are four connections per video board, and each enclosure holds four video input boards and four video output boards for a maximum matrix of 16×16.

The Enova DGX 1600 adds several new capabilities such as automatic setup of DXLink endpoints, single IP addressing for multiple endpoints, and a new web interface to greatly simplify installation and configuration. The new advanced Audio Switching Boards add audio breakaway capabilities and parametric EQ on each DGX output.

The Enova DGX 1600 is far beyond a modular media switcher with built-in controller – it functions as the centerpiece of a complete integrated solution that manages and distributes analog and digital audio and video including HDMI/HDCP, control and Ethernet. Easily integrate HDCP into system designs and enjoy hassle-free plug-and-play operation. No tools, no delays and no key constraints – it just works with AMX’s exclusive InstaGate Pro® Technology. Built for today’s and tomorrow’s needs, a comprehensive set of Enova DGX boards can be used in conjunction with DXLink and DGX Transmitters and Receivers to provide an end-to-end distribution system over twisted pair cable or fiber. An integrated NetLinx NX Controller and embedded Ethernet switch enables management of the entire solution including source equipment and display devices located throughout the environment – all from a single point of control.

In addition to eliminating HDCP delays, InstaGate Pro allows traditionally key limited sources to be switched freely to all connected HDCP compliant displays – eliminating HDCP key limitations that plague large applications. Built-in SmartScale® Technology on every output provides video that is perfectly scaled for each connected display, eliminating the integration challenges that can occur when sources and displays have different supported resolutions – making it easy to specify, easy to install and easy to use. With the powerful combination of analog-to-digital signal conversion, video scaling and high speed digital switching the system delivers perfect video every time – regardless of signal type.

As part of a complete distribution system, easily send analog or digital audio and video including HDMI with HDCP signals, plus control 10 Km over single mode fiber or 300 meters over multimode fiber; send all this plus power up to 100 meters over standard twisted pair cable to and from the Enova DGX using the DXLink Twisted Pair and Fiber Transmitters/Receivers.

Sennheiser – EM6000 Dante

Higher channel density with maximum signal reliability at the same time: Digital 6000 is intermodulation-free and assures through its equidistant frequency grid excellent spectral efficiency and the simplest frequency configuration– even in the toughest frequency environments where other systems already fail. Error correction and audio error masking recognize and fix problems long before they even become audible. When it comes to setup and the user interface, the EM 6000 stands out for clarity, relevance and short pathways.

Digital 6000 can be seamlessly integrated into existing digital or analog infrastructures. The EM 6000 receiver has a digital AES-3 output with word clock inputs and outputs, high-quality transformer-balanced analog XLR and 6.3 mm jack outputs as well as a 6.3 mm headphone output. The Dante™ version with an Audinate Brooklyn ll card additionally offers two Amphenol RJ-45 connectors for integrating the receiver into a Dante™ network, for redundant networks or daisy chain cabling.

Whether we’re talking about reducing information down to the really meaningful key values or smart menus on a high-contrast OLED display, every operating element is a result of practical experience and designed for practical use. All the vital parameters are summarized in one view. Important functions can be reached directly via home screens without long navigation paths. The auto-setup enables scanning and frequency distribution to all connected devices directly via the receiver; naturally Digital 6000 can also be monitored and configured via the Wireless System Manager (WSM).

The EM 6000 is compatible with UHF Sennheiser antenna systems.

I/O Interfaces

Dante Ch: 0x2
24-bit

See the product

B80_front-120305-REV-B|B80_front-120305-REV-B

Burl Audio

Burl – B80 Mothership

80-CHANNEL CONFIGURABLE AD/DA INTERFACE Simply put, the B80 MOTHERSHIP has redefined digital recording. For anyone who has felt that digital recording has been lacking soul, warmth and musicality, the MOTHERSHIP is the answer. Building on the technology of the two-channel B2 BOMBERS, the MOTHERSHIP was forged from BURL AUDIO’S deep dedication to analog class-A circuitry. Pushing the boundaries once again, the B80 MOTHERSHIP AD/DA converter has up to 80 analog channel capability. Using a card based system, and a heavy duty 4U chassis, the B80 MOTHERSHIP employs 10 card slots with 2, 4 and 8 channel AD/DA cards, all with the B2 quality signal path. B80 MOTHERSHIP Features:

4U main chassis
BMB1 (DigiLink) motherboard
BMB2 (MADI) motherboard
BMB3 (Dante) motherboard
B1 BNC Word Clock In
2 BNC Word Clock Out
10 card slots
All slots accept AD/DA, AES, MADI and BCLK
2, 4, and 8 channel analog cards

BAD4 Features:

44.1k Hz to 192k Hz, 24 bit, 4 channel ADC
Exact same circuit path as B2 BOMBER ADC
Proprietary, high definition, BURL AUDIO BX1 transformer input
All class-A, discrete transistors signal path with zero feedback, zero capacitors
4 XLR connectivity

BDA8 Features:

44.1k Hz to 192k Hz, 24 bit, 8 channel DAC
Circuit path based on B2 BOMBER DAC
Latest BURL AUDIO BOPA2, OP-AMP
All class-A, discrete transistors signal path zero capacitors
D-sub DB-25 connectivity

BCLK Features:

9 Word Clock Outputs (8 BNC, 1 AES)
Two independently programmable banks
Extremely stable, low jitter clock
Up to 92 Word Clock outputs in 1 unit

I/O Interfaces

See the product

Alfatron Electronics

ALF-DAI-2XLR

The ALF-DAI-2XLR 2 channel analog to Dante input adapter is a complete high-performance Dante device with the automation and ease-of-use features that make Dante the world’s most popular audio networking solution. The ALF-DAI-2XLR Adapter is compatible with all Dante interfaces and provides all the features you would expect from a Dante audio network. It is capable of providing high-fidelity audio reproduction, ultra-low latency, and sample-accurate synchronization across the entire network. Features:

Seamlessly integrate Dante systems into traditional analog systems.
There is no need to discard familiar mixing consoles, wireless microphones, and other analog signal sources, or analog amplifiers. All you need is to incorporate them into your audio network via Dante I/O.
With 2 channels of analog input on XLR
POE(802.3af)

I/O Interfaces

Dante Ch: 0x2
24-bit

See the product

AMX – DGX1600-ENC

Product Information

Similar Products

Sennheiser – EM6000 Dante

Burl – B80 Mothership

ALF-DAI-2XLR

Stay connected to Dante

Support

Company

Dante Networking Alliance