Cart
← Back to Product Catalog

Ampetronic – C10-2 Dante

Amplifiers

More details

Similar Products

Ashly_-_nXe_1504|Ashly_-_nXe_1504
  • Ashly Audio

Ashly – nXe1504bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 4x0
See the product
kling-freitag-d-120-4_500px|kling-freitag-d-120-4_500px
  • Kling & Freitag

Kling & Freitag – D 120:4

The K&F D80:4, K&F D120:4 and K&F D200:4 are mainly suitable for the installation field. These models cover different performance classes and come with a variety of innovations. RPM (rational power management) provides the flexibility to assign different power to each of the four output channels - this removes the need for a bridge operation later on. Other features include PFC (power factor correction), universal power adapters and various inputs - Dante (primary and secondary), AES and analogue. Based on the newly developed Lake core modules and exclusive K&F module pre-sets, the high-performance power amps that are fitted with red front panels will be able to operate all standard K&F systems in future. 
    Amplifiers
See the product
ashly-nXe-4004_600px
  • Ashly Audio

Ashly – nXe4004bd

The nXe4004bd unit is a 4 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x0
  • 44.1kHz-96kHz
See the product