Cart
← Back to Product Catalog

AMK – DS82-B-X

Speakers

More details

Similar Products

Crest_Audio_VR_218_Sub_Front
  • Crest Audio

Crest Audio – Versarray PRO 218 SUB

The Versarray™ Pro 218 Sub Powered Subwoofer speaker system consists of a pair of 18″ Low Rider® woofers combined with a super-solid cabinet with a simple, quick, yet flexible rigging system.  Designed to provide modular coverage of small to medium venues, and intended for use with the companion Versarray™ Pro 112 models, the Versarray™ Pro 218 Sub offers excellent versatility with a very high performance capability. The subwoofer system consists of the following woofer components: a pair of 18″ Low Rider® series woofers with a very long throw 4″ voice coil structure. Capable of over 800W of continuous power handling (AES Std 2-1984) each, these woofers can project a lot of low frequency energy. 

The Versarray™ Pro 218 Sub incorporates Peavey’s UniVent™ air pumping venting system.  The UniVent™ venting system literally pumps air through the enclosure, exchanging the stale hot air inside the cabinet for the cooler outside air. This helps keep the woofer operating temperatures from getting so high, and increases reliability and reduces power compression under heavy continuous drive conditions. The air pumping action is achieved without excessive turbulence or any significant net asymmetry of total vent air flow.

Power for both woofers is supplied by some very efficient power amplifier systems, controlled by a sophisticated and refined DSP operations system with Dante connection capability.  Total system power is 3000W total peak power, with 1500W total sine wave power for the woofers. This sheer power is controlled precisely and processed by a high performance DSP system, which provides all the crossover and EQ functions, as well as providing all limiting, compression and driver protection duties with unfailing attention to every detail of the music.

An optional special groundstack bracket set mounts to the Versarray 218 Pro Sub, and allows up to three of the Versarray™ Pro 112’s to be mounted on top of the Versarray 218 Pro Sub, and angled upward, for use on stage in a stadium seating situation. 

    Speakers
See the product
CA306D_0
  • DMIX

DMIX – CA-306D

Technical parameters：

Speaker model: CA-306D

Unit configuration: 6×3"(75mm) Full frequency unit

Frequency range: 130Hz-20kHz

Rated power: 120W

Sound pressure level: 118dB

Sensitivity: 95dB

Coverage Angle: 100°×50°

DSP processing: 1 DSP, with gain, equalization, voltage limit, noise gate, mute control adjustment

Connection mode: RJ45 interface

Size (mm) : 124×548×154 (W×H×D)

    Speakers
See the product
ALPoE4.1_frei
  • Aimline

AIMLINE – AL4.1PoE

The AIMLINE AL 4.1PoE column speaker is powered by a POE+ network amplifier with two channel Dante input. No external power supply is required.Thanks to the use of a high efficiently power supply this amplifier is rated with 30 Watts RMS / 60 Watts peak (using a PoE+switch). The enclosure is equipped with 4 x 3,5” speaker and 1” HF driver in a biamped system.The internal powerful 96 kHz DSP gives access to gain, delay, 10-Bd EQ with IIR filter and 24 internal presets. The PANC software controls the DSP in an IP network. This system will solve the issue of having to provide a separate amplifier or I/O interfaces for speaker installations using just a single CAT cable over long distances. This assembly can be used in wide range of projects in multi zones for speech and background music applications.

    Speakers
See the product