ZW-D4


More Details

Similar Products

atterotech-unHX2D_1200px
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unHX2D

The unHX2D is a DanteTM enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante audio network. In addition, the unHX2D includes two line level analog inputs and outputs that can be independently bridged to/from a Dante audio network. An adjustable audio delay buffer is included on the Dante output for audio and video lip sync. The unHX2D features flexible audio routing between system input sources and outputs, and facilitates bridging audio from either video sources or monitors to a Dante network. The HDMI output operates as a pass thru repeater of HDMI input video source. The unHX2D also includes installer adjustable EDID management settings via software.
    Audio Embedders & De-Embedders
  • Dante Ch: 2x2
  • 24-bit
og-dante-12gam_2
  • AJA Video Systems

AJA – OG-DANTE-12GAM

OG-DANTE-12GAM is a new high density, openGear-compatible solution for bridging 12G/6G/3G SDI sources with embedded audio to and from the Dante audio ecosystem. Dante audio networking provides digital audio distribution over IP networks, supporting uncompressed, multi-channel, low latency, high-resolution audio, with scalability, simplified wiring, and easy installation. OG-DANTE-12GAM provides a high-density infrastructure solution bridging Dante to SDI and back, ideal for stadiums, theaters, concerts, stage rentals, houses of worship, universities, and other production environments. OG-DANTE-12GAM features industry-wide compatibility with openGear frames, allowing for up to 640 channels of SDI/Dante audio bridging within a single 2RU frame housing 10 cards.

OG-DANTE-12GAM features include:

Support for 12G/6G/3G SDI embedded audio to and from the Dante audio ecosystem
Dual, and independent 12G-SDI, (2x Inputs and 2x Outputs), each supporting 16 embedded audio channels, totaling 64 channels per card in a compact design
Compatibility with openGear frames from AJA and third-parties
High density and small form factor, enabling 10 cards to be utilized in a single openGear frame for up to 640 channels of SDI/Dante audio bridging
Ross DashBoard control software support for remote signal status and configuration, on Windows, macOS and Linux Support for Dante Controller software
Industry-leading five year warranty

    Audio Embedders & De-Embedders
ZW-D1
  • ZenWin

ZW-D2

Features
  • It can display the current IP and other settings.
  • Gain and other parameters can be set in the software
  • Connect directly to the network using Ethernet cables
  • Dante devices can be controlled in remote mode
  • Dual port backup, PoE power supply, and independent external power supply
  • 4 microphone/line input with phantom power supply, 4 line outputs
  • The entire scalable Dante system has 512 bidirectional audio channels
Technical specifications:
  • Frequency response 20-20kHz
  • Input impedance of 2k ohms (microphone); 68 ohms (line)
  • Output impedance of 100 ohms (microphone); 100 ohms (line)
  • High pass filtering at 80 Hz, 18 dB/octave
  • Sampling rate 48K
  • Power consumption less than 5w
  • Total harmonic distortion<0.01%
Interface:
  • (Input) Balanced audio, quick connect to 4 header ports
  • (Output) Balanced audio, quick connect to 4 header ports
  • 1 independent power interface
  • 2 Dante network interfaces
  • Phantom power supply+48V
  • Power supply requirement+48V DC or IEEE802.3af PoE
  • Dimensions 44mm x 210mm x 166mm
    Audio Embedders & De-Embedders
  • Dante Ch: 0x2
  • 24-bit