Product Information
The xIO XLR-Series sets a new standard for performance IO with pristine audio, industrial-strength materials, exceptional design, AV control options, and a complete line of models that reliably deliver sophisticated results.
Similar Products
- promedias
promedias – proDT 4XI UP
Flush-mounted connection with 4x XLR Input female to Dante, EDIZIOdue
- AES67 & DDM ready!
- 4x0 LINE IN (XLR female)
- PoE / 5VDC Input
- Stereo L+R DANTE® Broadway
- Sample Rate: max. 192kHz | Latency: min. 0.25ms
- Network Speed: 1Gb/s / 100Mb/s
- Dimensions: Gr. I+I (1x2/2x1) - 148x88x59mm bzw. 50mm
- Installation dimensions: 120x67x44mm bzw. 120x60x44mm (cutout x depth)
- Color: white (Feller 61), similar to RAL 9010 (auch als Standard black 60 or option RAL/NCS colour!)
- Wall Plates
- RDL
RDL – DDB-BN40
The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block.
The DD-BN40 is a complete wall-mounted Dante audio network interface. It features four XLR mic or line inputs on the front panels and two line outputs on a rear-panel detachable terminal block. Special software is not required to configure the DD-BN40. Each input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom for that input; the second switch selects the mic or line gain range; the third switch sets the gain. Each output provides a switch to set the output to balanced professional or unbalanced consumer level. The DD-BN40 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN40 is PoE powered, and is available in multiple finishes with optional customized graphics.
The four XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels.
Two Dante audio channels are converted to balanced line level. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to unbalance the audio and attenuate the level to -10 dBV. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. The outputs are connected through a detachable terminal block.
The outputs are intended for connection to RDL AMS connectors mounted in Decora-style plates that match the DD-BN40. AMS audio connectors include RCA, Mini and XLR jacks. The output plate may be located together with the DD-BN40 in a triple gang box or may be mounted remotely in a single box.
Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit.
The DD-BN40 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates.
The DD-BN40’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
- Wall Plates
- promedias
promedias – proDT CO UP
Flush-mounted connection with 2x cinch sockets output from Dante, EDIZIOdue
- AES67 & DDM ready!
- 0x2 LINE OUT (Cinch Stereo female)
- PoE / 5VDC Input
- Stereo L+R DANTE® Broadway
- Sample Rate: max. 192kHz | Latency: min. 0.25ms
- Network Speed: 1Gb/s / 100Mb/s
- Dimensions: Gr. I (1x1) - 88x88x59mm bzw. 50mm
- Installation dimensions: Ø64x44mm bzw. Ø60x44mm (cutout x depth)
- Color: white (Feller 61), similar to RAL 9010 (also available as standard, e.g. black 60 or option RAL/NCS colour!)
- Wall Plates