Cart
← Back to Product Catalog

Wohler – iVAM1-1

Audio Monitors

More details

Similar Products

iAM1-8_o
  • Wohler

Wohler – iAM1-8

An Audio Monitor that provides Value for Money!

The new iAM1-8 is an easy to use 8 channel IP ready audio monitor which comes standard with 3G-SDI and Analog inputs, loudness monitoring and phase status. It is intended for those end users who only need 8 channels of monitoring and want a price break from our fuller-featured units. License other signal formats and processing options, including Dolby, AoIP, Toslink and 8 channel Analog, as and when needed, either initially or after purchase.

Flexible. Adaptable. Future Proof.

iAM1-8 is designed to be easy to operate, providing fast access to meters, menus and presets. Options for additional signals, including AES3, MADI64, DanteTM, RavennaTM, SMPTE-2110 and SMPTE-2022-7.

All iAM Series monitors contain an onboard web server. Multiple units on the same network can be updated, monitored and controlled via a browser-based user interface that supports fast configuration with role-based authentication that protects critical configurations from unauthorized alteration.

    Audio Monitors
  • Dante Ch: 64x0
  • 24-bit
See the product
IS4250P-Front
  • Australian Monitor

Australian Monitor – IS4250P

The IS4250P is a Quad Channel 250W amplifier for low impedance and 70/100V Systems. Featuring ethernet control, DSP and ErP standby compliance. The ISP series is Australian Monitor's premium offering of multichannel Class D power amplifiers, delivering high quality audio reinforcement in the following options - Dual channel 120W or 250W and Quad channel 120W or 250W. Featuring Ethernet control, Full Featured DSP, ErP Low Power Standby, Dante® support and efficient Class D amplifiers. The ISP also features an embedded User Interface which can be accessed from any device supporting an HTML5 compliant web browser.
    Audio Monitors
See the product
ctp-systems-D4080
  • CTP Systems

CTP Systems – Prehear D4080

The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs. The Prehear D4080 is a Dante enabled version of our analogue Prehear 1020. The unit is unusual in that it is Dante equipped but is also fully functional in stand alone analogue mode or even both at once, particularly useful for derigs. The unit presents itself to the network as a ten input, two output device but also has ten analogue inputs and two analogue outputs. All inputs are selectable to either or both of the two internal speakers, line level speaker outputs and headphone socket with individual volume controls, cut buttons and signal input LEDs. The unit includes a secondary port for Dante Redundancy or a switch output. Both ports include network activity LEDs.  The Prehear 4080 covers all those 'listen' feeds required by production. Pre-fade listen feeds of presenters, off air feeds, and all those other bits and pieces that waste talkback matrix inputs can be fed directly to these units with convenient local control. Each input may be switched to left, right, or both speakers.  Each channel has an audio present (VOX) indicator, a volume control and a cut switch with bright blue illumination.  There is a speaker cut button with red illumination and a stereo headphone socket suitable for stereo or 316 jacks. An indicator illuminates on successful connection to the network. Both loudspeaker amplifiers have built in limiters to protect the loudspeakers. All analogue inputs and outputs are on XLR and there are two line level outputs with switching following the left/right/both switches.  Dimensions: 1RU 160mm deep.
    Audio Monitors
  • Dante Ch: 10x2
  • AES67 Enabled
See the product