VUE Audiotechnik - V4-d

VUE Audiotechnik – V4-d

Product Information

The V Series Systems Engines provide VUE loudspeakers with a highly sophisticated, networkable DSP and amplifier solutions that enable optimal performance when combined with almost any VUE loudspeaker system. The V Series Systems Engines combine sophisticated, next-generation DSP technology, onboard SystemVUE networking, and powerful, high-efficiency class D into a compact, 2U rack mount chassis. The V Series line consists of two models, including the 2-in/4-out V4, as well as the 2-in/6-out V6. Both the V4 and V6 are available in either touring configuration (with front panel LCD interface) or installation configuration (without front panel LCD interface).

Rane – HAL EXP1x

The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate. The EXP1x adds eight RAD ports to a HAL1x via the Expansion Bus. The EXP1x requires a HAL1x to operate. DR remotes are also supported on any RAD port, so the EXP1x also adds additional DR remotes. The graphic below shows most of the range of RADs and DRs that connect with shielded CAT 5e cable (or better). 512 inputs and 512 outputs are possible if 32 EXP1x Expanders are cascaded to a HAL1x.

DSPs (Digital Signal Processors)

Dante Ch: 32x32
44.1kHz-96kHz

See the product

Magnetic

Magnetic – MA-808Dante

Mode	MA-808Dante
Input Channels	8
Output Channels	8
Scenem anagement	8 sets of pre -set scenes
Input channel features	Pre-amplification, signal generator, expander,compressor, automatic gain control, 5-section PE Q
Output channel features	8-section PEQ, delayer, frequency divider, high - lowpass filter,lim iter
Sampling rate	48kHz
Dynamic range from input tooutput	>110dB
Phantom power	DC 48V
Input common-mode reject ion	75dBu @ +20dBu,60Hz
Channel isolation	105dB
Frequency response	20~20kHz (±0.5dB )
Total harmonic distortion (THD+N )	≤0.005% @1kHz,+4dBu
Max. input gain	54dB
Input impedance	2KΩbalance
Output impedance	100 ohm
Max. output level	20dBu
Power supply	AC 110V~230V AC, 50Hz /60 Hz
Working temperature	0-40℃

DSPs (Digital Signal Processors)

See the product

DELEC

DELEC – oratis CS R4000

The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck. The product range includes oratis matrix frames of various sizes. Up to 15 oratis cards per 4-U matrix frame is achievable. Thus, oratis systems are the first choice whenever every inch counts – for example, in an OB truck. Each matrix frame holds up twelve oratis IF LAN cards, each connecting one commentator terminal. The IF LAN cards can be combined with audio interface and intercom cards and can be supplemented with GPI interfaces used for controlling external devices. oratis matrix frames can include a line-ident memory used for loop-playing up to 24 idents. This enables the various stations live studio lines to be identified uniquely. As soon as the commentator goes on-air, the line ident is automatically muted.

DSPs (Digital Signal Processors)

See the product

VUE Audiotechnik – V4-d

Product Information

Similar Products

Rane – HAL EXP1x

Magnetic – MA-808Dante

DELEC – oratis CS R4000

Stay connected to Dante

Support

Company

Dante Networking Alliance