Unica 4T


More Details

Similar Products

NAM-603_600px
  • DELEC

DELEC – unito NAM 603

The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The unito NAM 602/603 is the first product from a new DELEC range – a speaker amplifier for IP networks that converts traditional analog and digital audio to IP and vice versa. This way, it combines audio, which still relies mostly on analog technologies, with the emerging innovative world of IP. The NAM 602/603 transfers the audio from the Dante audio network right to the speakers and, therefore, is the ideal monitoring tool for a multitude of applications. Designed for either indoor or outdoor use, the NAM 602/603 carries an IP66 rating that ensures solid performance under the most challenging conditions. This unit incorporates dual 1GB Ethernet ports (2 x RJ45), four outputs that deliver 12W RMS at 4, 8 or 16 Ohms or, alternatively, two outputs delivering 24W RMS at 8 or 16 Ohms, AES/EBU input and output capability, plus a microphone input. Like the NAM 203, this higher capacity model also provides Delay and Gain, as well as FIR and IIF filters on each channel. The unit is powered by an external power supply. Also noteworthy, the NAM 603 offers redundant audio sources for power amp inputs when used in combination with other DELEC Dante enabled products.
  • Direct monitoring in Dante audio networks
  • Integrated power amplification
  • Simple configuration via web interface
    Amplifiers
Four_Audio_-_PPA_2200-2_0|Four_Audio_-_PPA_2200-2_0
  • Four Audio

Four Audio – PPA 2200-3

2200W three channel amplifier. The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers. 2200W three channel amplifier. The PPA series provides a high-quality DSP-powered amplifier solution for active loudspeakers. It features Pascal high-power modules, analog, digital and Dante inputs and is available in different configurations for various kinds of speakers. Signal processing is done in 24 bit floating point on an Analog Devices Sharc DSP and uses dual range ADC for high dynamic input range.
    Amplifiers
Ashly_-_nXe_754
  • Ashly Audio

Ashly – nXe754bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models). Remote Control ready via the Ashly Remote iPad® app, and/or hardwired Ashly remotes including analog (as well as serial) and Ethernet on nXe and nXp models. Monitor fault conditions and adapt via Ethernet and the onboard Fault Log included in nXe and nXp models.
    Amplifiers
  • Dante Ch: 32x32
  • 16-bit, 24-bit, 32-bit