Cart
← Back to Product Catalog

Thunder-KS4 I

Speakers

More Details

Similar Products

worxaudio-waveseries-218S_600px|worxaudio-waveseries-218S_600px
  • WorxAudio

WorxAudio – WaveSeries 218S

The 218S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of WaveSeries loudspeaker systems to 31Hz. It has dual long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 218S is a high performance bass reflex loudspeaker, designed to extend the low frequency response of WaveSeries loudspeaker systems to 31Hz. It has dual long excursion eighteen-inch cone driver in a tuned enclosure, providing extended response with extremely low distortion. The 218S is ideally suited for music reproduction and operates as a low frequency section in conjunction with other mid – high enclosures, or as a sub bass section for any loudspeaker system requiring enhanced low frequency performance. The sturdy multi-ply plywood enclosure, with a catalyzed polyurethane finish, is designed to withstand the most demanding portable applications. A perforated, powder coated steel grill with a high transmission ratio offers excellent protective properties. The 218S can be purchased in two versions. The portable configuration has large recessed handles, rigid casters, and a mid – high pole receptacle, while the installation version can be fitted with a variety of flyware. Both are available in white, black or unfinished exterior. The 218S loudspeaker is designed to satisfy a wide variety of low frequency audio applications and offers extraordinary performance and value.
    Speakers
See the product
CX112P
  • DMIX

DMIX – CX112P

Speaker model: CX112P

Speaker type: 12”Active coaxial loudspeaker

Unit configuration: LF：12" unit 2.5"(65mm）Voice coil

HF：1.7"（44mm）Voice coil driver

Frequency response: 70Hz-17kHz(-10dB)

Rated power: LF：250W， HF：50W

Sensitivity: LF：101dB， HF：109dB

Sound pressure level： 131dB (peak)

Radiation Angle: 60°×60°

Crossover point: DSP control

Size (mm) : 583×376×377 (W×H×D)

Module amplifier power: HF：150W，LF：500W (Class D)

Module input link: 1 balanced XLR input / 1 set of Dante signal input and output / 1 set of LINK output

Module DSP control: RS485、USB or Dante

    Speakers
See the product
studiolive-328i-w|studiolive-328i-w
  • PreSonus

PreSonus – StudioLive 328i-W

Designed for indoor flown installations, the 328i-W and 328i-B feature a smooth enclosure without handles or pole mounts and have additional reinforced M10 points for yoke and cathedral mounts. Internal grille cloth masks the drivers so that they blend seamlessly into their environments. Companion vertical and horizontal yoke mounts are also available. In all other respects the StudioLive 328i-W and 328i-B are identical to the StudioLive 328AI. Because of its distinctive dual 8-inch woofers and quad-amped design, the 328AI provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. Because of its distinctive dual 8-inch woofers and quad-amped design, the 328AI provides the highest fidelity in the StudioLive AI series lineup. Its compact size also makes it great for highly mobile applications and low ceiling installs. But it’s the 328AI’s ability to provide amazing vocal clarity that makes it shine for contractor installs and as a floor (wedge) monitor. For these reasons, the 328AI is also available in white and black install versions. Designed for indoor flown installations, the 328i-W and 328i-B feature a smooth enclosure without handles or pole mounts and have additional reinforced M10 points for yoke and cathedral mounts. Internal grille cloth masks the drivers so that they blend seamlessly into their environments. Companion vertical and horizontal yoke mounts are also available. In all other respects the StudioLive 328i-W and 328i-B are identical to the StudioLive 328AI. The StudioLive 328i-W requires the SL-Dante-SPK card for Dante connectivity.
    Speakers
See the product