Synq - DBT-44

Synq – DBT-44

Product Information

Top quality bidirectional conversion between DANTE® and 4 hi-grade balanced analog in/outputs.
GIGABIT Ethernet I/O, no linking delays.
Built-in DSP AUDIO PROCESSING (parametric EQs, compressors, delays, …)
AUDIO MATRIX: flexible routing, …
WEB SERVER with graphical DSP user interface.
Extremely high audio quality: S/N >120dB ~ THD: <0.003%
RENTAL version: 4 XLR line/mic inputs + 4 XLR-line outputs
POWER: PowerCON TRUE1 (100V-240Vac) or PoE class 0
2 units fit together in a 1U 19″rack

WorkPro – DD2

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

I/O Interfaces

Dante Ch: 2x2
16-bit, 24-bit, 32-bit

See the product

Turtle AV

Mineola 4×4

The Mineola 4x4 connects the digital Dante and analog XLR worlds with two inputs and two outputs, perfect for compact setups. PoE-powered and equipped with 48V phantom power on both XLR inputs, it’s ideal for easy microphone connections. All connectors are locking, with Neutrik etherCON on the dual network ports for reliable redundancy. Fully compatible with the entire Dante software suite, the Mineola 4x4 integrates seamlessly into live event production systems including vMix, Vizrt Vectar, Vizrt TriCaster, OBS, Telestream Wirecast. Designed for versatility and high performance, it’s the perfect solution for professional audio environments.

I/O Interfaces

Dante Ch: 4x4
24-bit

See the product

tm stagetec systems

tm stagetec systems – DIO

The tm stagetec systems DIO is the army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante™ audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources!

1000 point FIR filters on outputs. (perfect for PA integration with existing 100/70V systems)
Customised DSP options
Native Delec communication panel integration

I/O Interfaces

See the product

Synq – DBT-44

Product Information

Similar Products

WorkPro – DD2

Mineola 4×4

tm stagetec systems – DIO

Stay connected to Dante

Support

Company

Dante Networking Alliance