Cart
← Back to Product Catalog

Switchcraft – SD104QA

I/O Interfaces

More details

Similar Products
  • Sennheiser

Spectera Base Station

The Spectera Base Station is a 1RU hardware device that provides up to 64 channels (32 in/32 out) and utilizes up to two wideband RF carriers to accommodate all of the unit’s wireless transmission. It features redundant Dante and optional redundant Madi, assuring seamless integration into your audio network. Additional antennas can be added for redundancy, extended zone coverage, or additional spectrum capacity. The Spectera Base Station supports sample rates of 48 kHz and 96 kHz and features individual sample rate converters for all audio interfaces and wordclock I/O. Base Station must be activated with license per region.
  • 19’’ 1 RU Base Station with redundant power supplies
  • Provides up to 64 channels (32 in / 32 out) and allows for up to two independent wideband RF carriers in UHF or 1G4 (6 or 8 MHz) – country specific per region license
  • 4 ethernet antenna ports for redundancy, extended zone coverage, and additional spectrum usage
  • Redundant Dante® audio interface
  • Two optional slots for redundant MADI (OM or BNC)
  • Sample rates of 48 kHz and 96 kHz
  • Individual sample rate converters for all audio interfaces
  • Wordclock I/O BNC
  • Synchronized clock for all audio over RF allows 3D recordings and playback
  • Adjustable RF power from 10 – 100 mW (country specific)
  • RJ45 network interface for full remote control with secured interface
  • 11 Audio Link modes with selectable audio codecs (OPUS, SeDAC) or PCM
  • Secure transmission of confidential content using AES 256 encryption
  • Future expansion via Cascade port
  • Selective headphone output with volume control on front panel
  • OLED display, jog wheel navigation, and rugged metal housing
  • Base Station activation via LinkDesk: Spectera license defines respective frequency spectrum per region (license sold separately)
    I/O Interfaces
See the product
tannoy-vnet2-dante-bridge_600px
  • Tannoy

Tannoy – VNET2-Dante Bridge

The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply.  The VNET2-Dante Bridge is a standalone device available from Tannoy, designed to facilitate integration of VNET2 products such as QFlex with Dante digital audio networks. It is powered via PoE, or alternatively by an optional extra 12 V power supply.  Dante is an audio networking technology developed by Audinate. It allows many channels of uncompressed digital audio, and control data to be conveyed down a standard Ethernet network. The VNET2 Dante Bridge allows VNET2 devices to be seamlessly integrated into Dante systems with the minimum of fuss. Analog outputs also allow the Dante Bridge to be used with products that do not have VNET2 Interfaces, such as 1st generation VNET speakers and SC1 controllers. The three primary uses for the Dante Bridge are:
  • Dante audio to AES3 conversion with VNET control (for use with VNET2 equipped products – currently only Tannoy QFlex)
  • Conversion of Dante audio to analogue audio with VNET™ control (for use with VNET equipped products)
  • Conversion of Dante audio to analogue audio (for Dante break-out to any product with analogue inputs)
    I/O Interfaces
  • Dante Ch: 2x0
  • 24-bit
See the product
audiopressbox-APB-P112-OW-D
  • AudioPressBox

AudioPressBox – APB-112 OW-D

The APB-112 OW-D is an active, on wall AudioPressBox unit with 1 channel DANTE input and 12 LINE/Mic outputs. The DANTE-enabled on wall unit features 1 channel DANTE input with high quality digital to analog converter. Powered via PoE from DANTE-network. The unit has 12 balanced, individually transformer isolated Line/MIC outputs. The unit is powered only via PoE from DANTE network. This is a PoE level 3 device
    I/O Interfaces
See the product