Cart
← Back to Product Catalog

Sonifex – AVN-AI16R 16 Input Dual Dante® Interface, PoE

I/O Interfaces

More details

Similar Products

DIO1616MAXLRfb
  • CTP Systems

CTP Systems – DIO1616MA-XLR

The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. The unit operates at 48kHz and 96kHz and network connection may be copper and/or fibre and is PoE enabled. The DIO1616MA-XLR is a Dante enabled interface converting sixteen analogue microphone or line level inputs to Dante streams. The unit also converts Dante streams to sixteen line level analogue outputs. All microphone/line level inputs have adjustable gain from +65dB to -12dB and the analogue outputs from +12dB to -12dB in 1dB steps. Phantom power may be selected to each microphone input. Network connections may be copper and/or fibre via two SFPs and the unit includes connections for network redundancy. The DIO1616MA is PoE enabled so may be operated without a mains supply if required. All level control and phantom switching is adjusted using the built in web server. The unit operates at sample rates of 48kHz and 96kHz. The unit will also operate in AES67 mode. Power is PoE or mains 110-240 VAC 50/60Hz auto switching. Dimensions 2RU, 300mm deep.
    I/O Interfaces
  • Dante Ch: 16x16
  • 48kHz-96kHz
See the product
bo-16dx_in_main
  • TASCAM

TASCAM – BO-32DE

The TASCAM BO-32DE is a rugged, rackmounted audio adaptor designed for professional installation. 32 front-panel Eruoblock connectors are internally bridged to four D-Sub output connectors on the rear panel, providing fast and easy I/O and interconnectivity between CD players, Digital Audio players, Mic Preams, Zone Mixers, Distribution Amplifiers Audio over IP Convertors and more.

    I/O Interfaces
  • Dante Ch: 0x0
See the product
Large_Web_DA11AU_3D
  • Blustream

Blustream – DA11AU

Blustream's DA11AU has been designed to convert unbalanced or balanced 2ch analogue audio to Dante® digital signal. The DA11AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers, and Blustream Matrix or distribution products to be connected as a source within a Dante® network. The DA11AU is a plug & play device that is powered using PoE (Power over Ethernet) from any PoE network switch and supports AES67 RTP audio transport.

    I/O Interfaces
See the product