SLX-D Quad-Channel Digital Receiver


More Details

Similar Products

  • Sennheiser

Spectera Base Station

The Spectera Base Station is a 1RU hardware device that provides up to 64 channels (32 in/32 out) and utilizes up to two wideband RF carriers to accommodate all of the unit’s wireless transmission. It features redundant Dante and optional redundant Madi, assuring seamless integration into your audio network. Additional antennas can be added for redundancy, extended zone coverage, or additional spectrum capacity. The Spectera Base Station supports sample rates of 48 kHz and 96 kHz and features individual sample rate converters for all audio interfaces and wordclock I/O. Base Station must be activated with license per region.
  • 19’’ 1 RU Base Station with redundant power supplies
  • Provides up to 64 channels (32 in / 32 out) and allows for up to two independent wideband RF carriers in UHF or 1G4 (6 or 8 MHz) – country specific per region license
  • 4 ethernet antenna ports for redundancy, extended zone coverage, and additional spectrum usage
  • Redundant Dante® audio interface
  • Two optional slots for redundant MADI (OM or BNC)
  • Sample rates of 48 kHz and 96 kHz
  • Individual sample rate converters for all audio interfaces
  • Wordclock I/O BNC
  • Synchronized clock for all audio over RF allows 3D recordings and playback
  • Adjustable RF power from 10 – 100 mW (country specific)
  • RJ45 network interface for full remote control with secured interface
  • 11 Audio Link modes with selectable audio codecs (OPUS, SeDAC) or PCM
  • Secure transmission of confidential content using AES 256 encryption
  • Future expansion via Cascade port
  • Selective headphone output with volume control on front panel
  • OLED display, jog wheel navigation, and rugged metal housing
  • Base Station activation via LinkDesk: Spectera license defines respective frequency spectrum per region (license sold separately)
    I/O Interfaces
  • Neutrik

NA-2I2O-DLINE

Connect your legacy audio gear to the DANTE® world. The Line I/O to DANTE® Interface is an end-of-network device. It is a breakout box which allows two channels of audio to be integrated into a DANTE® network.

    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
ferrofish-verto-series_1200px|ferrofish-verto-series_1200px
  • Ferrofish

Ferrofish – Verto Series

The A32 Dante Version has an additional interface with 64 digital inputs and 64 digital outputs, which can be easily integrated into existing DANTE networks. The VERTO series make integration of digital ADAT and MADI into an existing DANTE network really easy. The compact enclosure of 1RU height and a ½-19“ width saves a lot of rack space. Every VERTO device features word clock I/O for external synchronization and is remote controllable via MIDI or MIDI-over-MADI (VERTOMX). No matter if used together with our A16 MKII, A32 or Pulse16, or a converter from another brand – simply connect to the VERTO via ADAT or MADI – and you’re ready to go! Remote Control Via the Dante Network Both the VERTO series and all other converters from Ferrofish can be remotely controlled via the DANTE Network. If all devices are connected via MIDI, the VERTO converts all DANTE audio streams to ADAT or MADI and the control commands sent over DANTE into MIDI remote control messages. The VERTOMX offers an additional feature: Instead of a separate MIDI Port the MIDI messages are extracted from the MIDI-over-MADI port. The Verto series comprises of:
  • Verto32
  • Verto64
  • VertoMX
    I/O Interfaces