Cart
← Back to Product Catalog

Shure – MXWAPT8

I/O Interfaces

More details

Similar Products

arista-ars-0202-a00
  • Arista

Arista – ARS-0202-A00

E-Vocal DUO+ is a dual channel analog input and dual channels analog output Dante converter.

The product consists of four models:

  • E-Vocal ARS-0202-A00
  • E-Vocal ARS-0202-B00
  • E-Vocal ARS-0202-A11
  • E-Vocal ARS-0202-B11

E-Vocal ARS-0202-A00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog inputs to be integrated into a Dante ® network and converts a Dante ® stream into two channels of analog audio output signals. It has an RJ45 copper network interface and can be powered by PoE or 12VDC. Dante DUO+ has a rubber protection shell and rack mount brackets as optional items. More info: https://www.aristaproav.com/product/duo-plus/

    I/O Interfaces
See the product
fohhn-abx-5_1200px|fohhn-abx-5_1200px
  • Fohhn

Fohhn – ABX-5

The ABX-5 can be used as an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system and as a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. The ABX-5 can be used in two ways: 1. As an interface between Dante™ audio networking and the modular active FOHHN FOCUS VENUE loudspeaker system. In this situation, the ABX-5 does not need an additional external power supply. 2. As a Dante™ to AES/EBU Breakout module and FOHHN-NET Ethernet adapter. In both cases FOHHN-NET control signals will be transmitted via Ethernet. The ABX-5 is equipped with a Dante™ Brooklyn II module. It has a Dante™ Primary and Secondary port for redundant applications.
    I/O Interfaces
  • Dante Ch: 8x0
  • 24-bit
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 32.0MD

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 32.0MD provides 32 balanced analog audio inputs and 0 outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. With DB-25/AES59 termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32x0
  • 24-bit
See the product