Cart
← Back to Product Catalog

Shure – ANI4IN-XLR

I/O Interfaces

More details

Similar Products

mansion-DIC4E3A|mansion-DIC4E3A
  • Mansion

Mansion – DIC4E43A

DIC4E43A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. DIC4E43A is a high quality Dante interface box for converting four Dante channels to Analogue Audio outputs, and four Analogue Audio inputs to Dante network. Features
  • Provides Dante Interface for Four Inputs / Outputs
  • Four Standard MIC or LINE Audio Channels Converts to Dante Network
  • MIC/LINE selectable on Each Input
  • Gain Control on Each Input
  • Provides 48V Phantom Power for Each Condenser Microphone Input
  • Accepts Balanced or Unbalanced Signal Inputs
  • Each Audio Input Signal LED on Front Panel
  • Each Audio Output Signal LED on Front Panel
  • Four Balanced Audio Output Line Level from Dante Network
  • High Resolution 24 Bit Converts Analog to Digital and Digital to Analog
  • LEDs Indicate the Status for Power and Network Sync
  • Powered by External 24VDC Power Supply
  • Normal Operation with PoE Enable Network Switch
    I/O Interfaces
See the product
rdl-dd-bn22_1200px_0|rdl-dd-bn22_1200px_0
  • RDL

RDL – DD-BN22

The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. The DD-BN22 is a complete wall-mounted Dante audio network interface. It features two XLR mic or line inputs and two XLR mic or line outputs on the front panels. Special software is not required to configure the DD-BN22. Each XLR input provides three switches that may be set from the front of the unit when the cover plate is not installed. One switch enables or disables P48 phantom; the second switch selects the mic or line gain range; the third switch sets the gain. Each XLR output provides a switch to set the output to balanced professional line level or mic level. The DD-BN22 fits a standard US dual-gang electrical box or an RDL WB-2 back box for installations in thinner European or equivalent walls. The DD-BN22 is PoE powered, and is available in multiple finishes with optional customized graphics. The two XLR inputs are each converted to a separate Dante network transmit channel. Three gain settings are switch-selectable for both the mic and line input ranges to match condenser or dynamic mic levels and standard line levels. Two Dante audio channels are converted to balanced line level on front-panel XLR jacks. Each output provides +4 dBu balanced for a network digital audio level of -18 dBFS. Each output is equipped with a selector to set the output to line level or attenuate the output by 50 dB to mic level. These switches are located on the top of the chassis and are set by the installer prior to mounting the unit. Valid PoE power and synchronization to the Dante network are indicated by green LEDs visible from the front of the unit. The DD-BN22 is a professional grade product with discrete mic preamplifiers for studio quality fidelity and low noise performance, coupled through metal XLR jacks housed in a stainless steel chassis with dual powder-coated or stainless steel Decora front plates. The DD-BN22’s superior performance specifications make it ideally suited to the most demanding installations, and an exceptional value in commercial networked audio systems. This full-featured product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Designed to outperform. Built to last.
    I/O Interfaces
See the product
ASL-ENC-1201_1200px|ASL-ENC-1201_1200px
  • ASL

ASL – Enchorus ENC 1201

The ENCHORUS ENC 1201 Dante™-based audio network module offers eight high dynamic range (HDR) microphone inputs and four line outputs. Each microphone input has four splitters with individual trim, mute, phase reverse, and a 4-band equalizer. The dynamic range of each microphone amplifier is more than 152dB. A four-band equalizer is also provided for each output, and the ENC 1201 features eight built-in mixing engines and support for sample frequencies up to 192kHz. The device is easy to control and monitor through a web interface. A built-in audio matrix allows flexible routing of all inputs, outputs, and mixer signals. The ENCHORUS Dante™-based audio network was designed specifically for stage applications, offering professional connectors and superior audio quality. All ENCHORUS models include filtering and mixing capabilities and can be configured very rapidly via the integrated web interface. ENCHORUS modules are tough enough on their own but also include rubber bumpers that allow them to be easily and safely stacked on stage.
  • Throw-down Box
  • 8x HDR microphone inputs with 4x splitters for each microphone
  • Individual mute, phase reverse, trim, and 4-band EQ for each of the four splits
  • Support of redundant Dante networks or daisy chainable
  • 4-band EQ for each output
  • 8x built-in mixing engines (16 inputs, stereo output)
  • Built-in audio matrix for flexible routing of all signals
  • Control via web interface
  • Sample rates: 44.1kHz/48kHz/88.2kHz/96kHz/176,4kHz/192kHz
  • Dynamic range > 152dB
    I/O Interfaces
See the product