Cart
← Back to Product Catalog

RTS – KP-5032PB Keypanel

Intercoms

More details

Similar Products

npx_h1100_front
  • Biamp

Biamp – NPX H1100

The NPX H1100 is a 10-button convenience paging station with handheld microphone for use in Qt X and Tesira systems. The H1100 features embedded DSP and on-board memory to support standard and advanced public address functionalities. Digital audio and control data can be transmitted by either AVB or Dante®. The NPX H1100 can store 999 user-configurable page codes and up to 10 prerecorded messages. Additionally, the H1100 supports both tabletop and wall mounting with a removable “foot” that allows the paging station to be mounted flat against any surface, and a K-slot is included for enhanced physical security via an optional Kensington® lock. The NPX H1100 meets convenience paging requirements for facilities of all sizes.

    Intercoms
  • Dante Ch: 0x1
See the product
clear-com-eclipse-hx-omega_1200px|clear-com-eclipse-hx-omega_1200px
  • Clear-Com

Clear-Com – Eclipse HX-Omega

Eclipse HX-Omega is the most advanced and highest density digital matrix system on the market, offering up to 460 ports (using combinations of 64-channel MADI cards, 32 port IP/Integra cards and 16 port MVX-A16 RJ-45 cards) over 15 interface card slots in a 6RU chassis.   Eclipse HX-Omega is the most advanced and highest density digital matrix system on the market, offering up to 512 ports (with any combination of 64 frames). Each 6RU Eclipse HX-Omega system features 15 interface card slots for housing one of many types of interface cards available for different applications. The MVX-A16 Interface card, for example, provides full-duplex connections with panels, external lines, and interfaces to other matrix systems. External interface modules are connected using external 1RU and 3RU IMF frames, leaving all 15 slots available for port and interface cards. Up to 64 Eclipse HX matrices can be connected to form a single networked installation. Eclipse HX-Omega Features:
  • 6RU system frame with passive back-plane and 15 interface card slots
  • Up to 512 internal ports (with any combination of 64 frames)
  • Dual-redundant processors, CPU-HX fitted; dual-redundant PS-208 power supplies fitted
  • Expandable to become a multi-frame system with redundant non-blocking fiber
  • Networking/Linking options include 4-wire, Fiber, IP, MADI, E1/T1, GPIO, DANTE and AES67
  • Seamless integration with FreeSpeak II Wireless Intercom and IP Communication Panels 
    Intercoms
  • Dante Ch: 64x64
  • 24-bit
See the product
Beatrice_P1_Angle_BAN
  • Glensound

Glensound – Beatrice P1

The Beatrice P1 is a phone handset for Dante® network intercom. The Beatrice P1 is a one channel handset. The user of the handset on the P1 can listen to one audio feed from the network and send one audio channel out onto the network. Depending upon how the Dante® network has been routed the incoming audio circuit and outgoing audio circuit can be different locations and the outgoing circuit can be routed to multiple loctions. Audio to / from the handset is automatically turned on when the handset is off the hook and turned off when on hook.  
    Intercoms
  • Dante Ch: 1x1
  • 24-bit
See the product