Cart
← Back to Product Catalog

RDL – RU-MLB4P

I/O Interfaces

More details

Similar Products

24e8ec993ef49ab61859625561a6fa7b
  • Lectrosonics

Lectrosonics – M2T

The M2T half-rack transmitter houses two stereo transmitters to provide two stereo audio channels, and for up to four mono audio channels in a single rack space. The audio inputs can be individually configured to be analog or Dante compatible. The analog input connectors are full-size XLR/TRS combo types for balanced line-level analog signals while the input preamp circuits use a special balanced amplifier with very high common mode rejection to minimize hum and noise.

A Dante™ Ultimo™ interface via dual RJ45 connectors accepts Dante networked audio inputs and can daisy chain the digital stream to additional units via CAT6 cables. An additional RJ45 jack provides an Ethernet connection for programming and control via Wireless Designer™ software and a USB jack on the front panel allows for firmware updates. The transmitter features a full color, backlit LCD for high visibility in any environment, while the chassis is all-metal and can be racked singly or in pairs using included rack mount hardware. 

    I/O Interfaces
See the product
SARA-II
  • Martin Audio

Martin Audio – SARA II

The SARA II Premium Rendering Engine harnesses Spatial Sound Wave (SSW) technology and makes fully object-based, sophisticated immersive audio accessible for the end-user. CPU-based with a Linux ecosystem, each SARA II engine offers up to 64 MADI or 128 Dante configurable network pathways at 48kHz/24bit resolution. All paths are assignable to at least 32 audio input channels that can be rendered to up to 128 independently processed sound source outputs (point-source or plane-wave). True object-based immersive audio is achieved with 40 synchronisation updates per second, per object, to ensure absolute accuracy, plus advanced algorithms applied to fast moving objects to prevent audible errors. Latency is a mere 5ms.
    I/O Interfaces
See the product
AudioPressBox-apb-D116-R-D_1200px|AudioPressBox-apb-D116-R-D_1200px
  • AudioPressBox

AudioPressBox – APB-D116 R-D

The APB-D116 R-D is an active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders The APB-D116 R-D is an active 19″ rack, AudioPressBox Drive Unit, 1 LINE Input, 1-channel Dante Interface, 16 Line/MIC Outputs, 1 buffered Output for up to 3 AudioPressBox expanders. 1-channel active drive unit features 1 Analogue and DANTE input with high-quality digital-to-analogue converter. You can switch between Line or Dante input, depending on your needs. It offers 16 Line/MIC Level Outputs on the front and one output for expanders on the rear. Front outputs are balanced and individually transformer isolated with selectable output level for each output. You can expand the number of outputs with AudioPressBox expanders with up to 24 additional Line/MIC outputs per channel. As is AudioPressBox standard, you can use our signal processing like high-pass filter and compressor with limiter to achieve the perfect audio signal for all connected journalists. APB-Dante products uses Power over Ethernet (PoE). Power can be provided through the Ethernet cable from a PoE-capable network switch, or from a separate PoE injector. PoE Power Consumption: < 2 Watt 
    I/O Interfaces
See the product