Cart
← Back to Product Catalog

PSX1204D

Amplifiers

More Details

Similar Products

POE-DANTE-AES67-Audio-Amplifiers-MNS-AMP30XXA-1P-1280X720-001-768x432
  • MONISMS

MONISMS – MNS-AMP30XXA-1P

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.


The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.
MNS-AMP30XXA-1P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP3011A-1P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP3012A-1P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP3022A-1P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

    Amplifiers
See the product
monacor-AKB-30DT-DSP|monacor-AKB-30DT-DSP
  • Monacor

Monacor – AKB-30DT/DSP

Monacor's AKB-30DT/DSP is a Class D mono mixing amplifier with integrated Dante® module and DSP technology. Monacor's AKB-30DT/DSP is a Class D mono mixing amplifier with integrated Dante® module and DSP technology.
  • 2 x mono 15 W/4-8 Ω
  • Silent operation due to fanless cooling concept
  • DSP can be controlled via MONACOR DSP software or via app
  • Dante® input and feed-through output
  • Speaker outputs via plug-in screw terminals
  • Metal housing with mounting brackets
  • Power is provided via PoE (Power over Ethernet) or optional 12 V power supply
    Amplifiers
See the product
Powersoft-T604_front_big
  • Powersoft

Powersoft – T604

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit
See the product