promedias - proDT XI UP

promedias – proDT XI UP

Product Information

Flush-mounted connection with XLR Input female to Dante, EDIZIOdue

AES67 & DDM ready!
1×0 LINE IN (XLR female)
PoE / 5VDC Input DANTE® Broadway
Sample Rate: max. 192kHz | Latency: min. 0.25ms
Network Speed: 1Gb/s / 100Mb/s
Dimensions: Gr. I (1×1) – 88x88x72mm bzw. 67mm
Installation dimensions: Ø64x60mm bzw. Ø60x60mm (cutout x depth)
Color: white (Feller 61), similar to RAL 9010 (also available as standard, e.g. black 60 or option RAL/NCS colour!)

BARE – BR-202L

Product Description： 1. Use RJ45 network cable to connect in a "hand in hand" way; 2. Each connection box can connect 4 speaking units; 3. Use professional plugs to connect between the unit and the connection box 4. Connect to the previous connection box or directly connect to the conference host through the RJ45 network port interface, and the active expansion connection box; 5. Connect the LINK port or conference unit of the next connection box through the RJ45 network port interface. 6. Support video tracking

I/O Interfaces

See the product

NewHank

DO 22

NewHank DO 22 Dante network output adapter let you use your favorite analog audio gear with any Dante- connected system, delivering the interoperability, performance and scalability that only networking can bring. Cost effec^ve, compact and built for the road, it brings the modern network connec^vity that every audio pro needs in their toolbox.

I/O Interfaces

Dante Ch: 2x0
48kHz

See the product

Digigram

Digigram – Audioway Bridge B3

The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. The BRIDGE B3 is an intelligent gateway between AES/EBU digital audio and AES67/Dante™ synchronous audio-over-IP streams. In your infrastructure, the BRIDGE B3 is the ideal solution to connect any digital audio equipment with your Audio-over-IP studio. Thanks to its redundancy, the BRIDGE B3 can also provide secure distribution of your critical AES/EBU streams on any Dante redundant network.

Stainless steel 1U chassis power consumption <50 W
Front panel control interface for rapid overview of current status
Dual AC/DC power supply 4 configurable GPIOs Wordclock synchronisation 24-bit audio routing: 44.1 kHz to 96 kHz
AES67/Dante interface: 64-in/64-out EtherCON connector AoIP stream redundancy Integrated 4-port switch
AES/EBU interface: 16-in/16-out mono Wordclock synchronisation and SRC (sample rate conversion) on each input

I/O Interfaces

See the product

promedias – proDT XI UP

Product Information

Similar Products

BARE – BR-202L

DO 22

Digigram – Audioway Bridge B3

Stay connected to Dante

Support

Company

Dante Networking Alliance