Cart
← Back to Product Catalog

Powersoft – X4

Amplifiers

More details

Similar Products

ashly-nX-1504_1200px|ashly-nX-1504_1200px
  • Ashly Audio

Ashly – nX1504bd

Introducing our newest addition to the NX Series of Multi-mode Amplifiers: Now available in 150 & 75 Watts per channel housed in a 1U chassis. Multi-mode operation is standard on all nX amplifiers. Like it’s 2U models, choose from two or four channel configurations and set individual outputs to drive Low Impedance (2, 4, 8 Ohms), or 25V*, 70V, 100V Constant Voltage systems via rear-panel located DIP-switches. Add Ethernet (nXe) for monitoring and control, or add both Ethernet and Protea™ DSP (nXp). Expand onto a network with Dante™, CobraNet®, or AES3 digital inputs. Adapt Worldwide with a universal switch-mode power supply with PFC (Power Factor Correction). Reduce power consumption using Ashly EMS™ (Energy Management System) by triggering a sleep mode that draws <1W, which meets the most aggressive Energy Star® benchmark†. Follow pre-scheduled preset settings including levels and sources using RTC Event Scheduler (Real-Time Clock on nXe & nXp models).
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
dsppa-d2250
  • DSPPA

DSPPA – D2250

DSPPA's D2250 is a 2-channel amplifier. DSPPA's D2250 is a 2-channel amplifier. Features
  • Comply with Dante Network System
  • 2 channel amplifiers within one 1U & 19" case
  • Two audio inputs, can be added to the existing Dante system
  • Two priority inputs and two 100V inputs as audio sources
  • 70V/100V speaker output for long distance transfer
  • Industrial design for audio project, long term & stable use
    Amplifiers
See the product
duran-audio-industryamp-PB-800-dn|duran-audio-industryamp-PB-800-dn
  • Duran Audio

Duran Audio – IndustryAmp PB-800-DN

The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems.  The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.
    Amplifiers
See the product