Cart
← Back to Product Catalog

PC406-D

Amplifiers

Similar Products

K-array_-_KA84|K-array_-_KA84
  • K-array

K-array – KA84

The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors. The KA84 is a 4 channel per 2000W on 4 Ohm audio power amplifier and processing solution. Each model has 4 fully independent and configurable channels. The integrated DSP offers EQ, Matrix, Levels, Delays and Limiter functions on every channel, to avoid the need of external additional processors. The KA84 can be used as a mixer for fixed installations thanks to the microphone and Phantom power options available on every analog IN. 2 GPIO ports give easy external analog controls using K-array accessories. An onboard library preset with K-array speaker gives an optimal and easy configuration for endless combinations. All DSP functions are remote controlled via the K-framework software over RS485 (3-pin XLR) or integrated USB connector.  
    Amplifiers
  • Dante Ch: 0x2
  • 48kHz-96kHz
See the product
CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4060

The CMX DSP-4060 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
See the product
Inter-M_-_PMU_120N|Inter-M_-_PMU_120N
  • Inter-M

Inter-M – PMU 120N

The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. The PMU-120N is a 6-Input 120 watt mixer/amplifier with a built in digital portable media player that will playback MP3 / WMA / WAV audio files using the front panel mounted USB-A port. Music can be played directly from a USB memory stick without the use of an external playback device such as CD player. The PM series offers input flexibility with its 6 flexible microphone and line level selectable inputs. Direct PC USB audio input is possible via the built in USB PC sound card.
    Amplifiers
See the product