Neutrik – XIRIUM PRO RX


More details

Similar Products

mansionDIC2E23A
  • Mansion

Mansion – DIC2E23A

DIC2E23A is a high quality Dante interface box for converting two Dante channels to Analogue Audio outputs, and two Analogue Audio inputs to Dante network. Features: *Two Mic/Line Terminal Block Inputs on Rear Panel. *Converts Mic or Line Audio Signals to 2 Channels Dante Network. *Switchable Mic/Line/48V Phantom Power for Each Input. *Terminal Block for Two Audio Outputs on Rear Panel *Two Audio Signal Outputs from Dante Network. *Converts 2 Channels Dante Signals to Two Line Terminal Block Outputs. *Balanced or Unbalanced Signals for Inputs and Outputs. *Adjustable Gain Control for Output Level on Rear Panel. *LED indicators for Signal Level and Clip of Each Input Channel on Front Panel. *Adjustable Gain from -20 dB to +20dB for Each Input Channel on Front Panel. *LED indicators for Signal Level of Each Output Channel on Front Panel. *Power over Ethernet (PoE) or 24VDC power supply *LED Indicators Show the Status of Power and Network. *High Resolution 24 Bit for DAC and ADC *Provides High Quality of Preamplifier for Microphones. *Dimension: 143mm x 45mm x 93mm (WHD)
    I/O Interfaces
ru-nfdp_400px
  • RDL

RDL – RU-NFDP

The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. Model RU-NFDP operates from PoE. The RU-NFD is a high quality Dante network to Format-A interface/distributor compatible with RDL Format-A twisted pair audio products. The RU-NFD converts up to three Dante network audio channels to RDL Format-A. The unit also converts a fourth Dante audio channel to a balanced line-level AUX output. RDL’s Format-A system utilizes the 4 pairs of a standard CATx cable; 3 pairs (pairs A, B and C) are designated for sending and receiving audio and the fourth pair is used to distribute 24 Vdc to connected Format-A products. The RU-NFD provides signal presence metering and is equipped to power connected Format-A endpoints. The RU-NFD is also available in a PoE version (RU-NFDP). If PoE power and an external 24 Vdc supply are both feeding an RU-NFDP, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. 
    I/O Interfaces
tm-stagetec-dio
  • tm stagetec systems

tm stagetec systems – DIO

The tm stagetec systems DIO is the army knife for audio, with an impressive range of tools and converters. 2 port Ethernet switch (1x 1Gb Copper and 1x SFP cage), Dante™ audio, AES Input and Output, Mic Input, Line Input, Line Output, Headphone Output with external volume control and 2 x GPIO. The DIO is powered by PoE (Power over Ethernet) or runs via an external PSU. Redundancy is provided between both power sources!
  • 1000 point FIR filters on outputs. (perfect for PA integration with existing 100/70V systems)
  • Customised DSP options
  • Native Delec communication panel integration
    I/O Interfaces