Cart
← Back to Product Catalog

MONISMS – MNS-AMPMC30XXA-2P

I/O Interfaces

More details

Similar Products

sound-devices-md-4_1200px|sound-devices-md-4_1200px
  • Sound Devices

Sound Devices – MD-4

The MD-4 4x4 Analog-to-Dante Interface with Headphone Monitor is a simple, high-performance interface for connecting analog audio to Dante™ audio networks. The MD-4 4x4 Analog-to-Dante Interface with Headphone Monitor is a simple, high-performance interface for connecting analog audio to Dante™ audio networks. Four high-gain microphone or line-level inputs are available for connection to a Dante audio network. Additionally, four Dante signals can be sent to its four balanced analog outputs. Inputs or outputs can be routed to headphones for signal monitoring and metering. The MD-4 is an ideal companion in a rack with the Sound Devices 970 audio recorder. Key Features:
  • Four front-panel, balanced, analog, mic or line level inputs with 48 V phantom power and high-pass filter
  • Inputs accept mic or line level, and appear as Dante sends (transmit)
  • Eight-segment LED meter for each input
  • Four Dante signals (receiver) to four rear-panel XLR balanced-analog outputs
  • Headphone monitoring with LED level meters, with front and rear panel headphone output
  • Built-in AC power supply (100-240 V, 50/60 Hz on IEC C14) or 11-18 VDC powering (4-pin XLR)
  • Durable 1-U rackmount chassis
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
auvitran-AV-WALL-DT4i
  • Auvitran

Auvitran – AV-WALL-DT4i

The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm, designed to fit into a single-gang junction box (European format). It offers 2 XLR Mic inputs with 64dB gain and a line-in stereo mini Jack with 40dB gain. Gain can be controlled remotely (network) or locally (rotary button). The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm. The AV-WALL-DT4i offers 64dB of true preamp gain on 2 professional XLR Mic inputs and 40dB of gain at line level on a stereo mini Jack connector. Gain can be controlled remotely via network or locally via direct rotary push button. Internal connector allows for link with optional Bluetooth extension Wall-Plate. The AV-WALL-DT4i is designed to fit into a single-gang junction box of only 45x45mm fitting small European format. AV-WALL-DT4i is PoE enabled and thus power, control and audio data connectivity is provided by a single CAT‐5e/6 cable. The size of the main box is 44.6 x 44.6 x 50 mm. It is compatible with “Mosaic” plate of Legrand®. The depth can be adjusted between 26 to 43 mm to fit near any wall depths. Wall plate size may vary depending of the region.
    I/O Interfaces
  • Dante Ch: 0x4
  • 24-bit, 32-bit
See the product
Dante官网logo
  • BARE

BARE – DF-10

Features： 1. Automatically assign IP address through router DHCP; 2. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network. 3. With backup analog input interface and Dante network interface, transmission double backup; 4. With a link output interface, analog audio and digital audio can be connected hand in hand; 5. Integrate network transmission, pure digital power amplifier and full-range speaker with RS-232 control and monitoring; 6. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics; 7. It has perfect protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter).
    I/O Interfaces
See the product