Cart
← Back to Product Catalog

Mineola 2×2

I/O Interfaces

Learn more

Similar Products

junger-option-board-aoip-dante_1200px|junger-option-board-aoip-dante_1200px
  • Jünger

Jünger – Option Board Dante I/O

With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards. Note: This product is not sold separately. It is an option card for Dante compatibility with Junger's product suite. With up to 16 channels, the Dante™ I/O option board is meant to extend the interface capabilities of any Jünger Audio D*AP device. The modular approach of these devices allows combining different interface standards. Thus, it is possible to add advanced audio processing to your Dante™ network and bridge to other interface standards like AES/EBU, 3G SDI, MADI and analog. The Dante™ option board user interface is capable of displaying all signal names and labels within the D*AP device to make the routing as easy as possible. Further, the network configuration can easily be set up. D*AP devices equipped with this option board may work as sync slaves or can operate as a clock master (preferred master) for a Dante™ network. When configured as a sync master, it is possible to sync a Dante™ network to a SDI video signal.
    I/O Interfaces
  • Dante Ch: 64x64
  • 24-bit
See the product
arista-ars-0200-a00
  • Arista

Arista – ARS-0200-A00

E-Vocal DUO is a dual channel analog input or dual channel analog output Dante converter. It consists of three models:

  • E-Vocal ARS-0002-A00
  • E-Vocal ARS-0002-A01
  • E-Vocal ARS-0200-A00

E-Vocal ARS-0200-A00 connects your legacy audio gear to the Dante ® world. It allows two channels of audio analog input to be integrated into a Dante ® network. It's AES67 compliant and provides high resolution 24 bit analog to digital conversion. It can be powered by PoE or 5VDC via Micro USB connector. More info: https://www.aristaproav.com/product/duo/

    I/O Interfaces
See the product
aeq-netbox-4mh
  • AEQ

AEQ – NetBOX 4 MH

The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network. The NETBOX 4MH interface has been designed to cover the need for high quality microphone inputs and headphone outputs availability outputs, for example in radio and TV studios, stage or multimedia installations. The multichannel IP connectivity (Audinate DANTE™ protocol) makes the Inputs of the unit available at any point of the network. NETBOX 4MH interface also includes 4 General Purpose inputs and outputs (GPIO) as interfaces for signaling transport between the different devices in the IP network. As a complementary feature, the unit is soporting the same inputs and outputs as analogue balanced line Inputs and Outputs. Further, the new interface has additional GPIOs that can be used in for example a studio installation and as an interface to signaling terminals such as the AEQ SRC 03. This greatly facilitates the implementation of services such as remote CUE and Cough-cut, User keys, ON AIR and READY lights, etc. Technical specifications
  • Channels: 4 microphone-line input, 4 line outputs, in parallel with 4 stereo headphone outputs. Mute and gain control between +12 and -30 dB, individually or in stereo pairs.
  • 48V Phantom Power supply and electronic balancing for all microphone inputs.
  • Data format: DANTE Audio-over-IP technology.
  • Scalable and flexible network topology supporting a wide range of audio transmitters and receivers.
  • Supports 100Mbps, 1 Gbps and 10 Gbps network segments.
  • 2 x RJ45, 100 BASE-T Ethernet ports with galvanic isolation, usable as “daisy chain” connections.
    I/O Interfaces
See the product