Mineola 16×16


Learn more

Similar Products

aurora-hte-rx2_600px
  • Aurora Multimedia

Aurora Multimedia – HTE-RX2

The HTE-RX2 is an HDBaseT receiver. The HTE-RX2 is an HDBaseT receiver.
  • 4K60 4:4:4 HDR 18Gbps
  • 100m (330ft) with Unshielded Cable
  • HDMI® 2.0/HDCP 2.2
  • Audio DSP & Dante™/AES67 Options 2 or 8 Channel
  • Operate & Power both TX & RX from a PoE Switch
  • HDMI® Output(s)
  • 10/100 LAN Port(s)
  • USB 2.0 Device/Host with Selectable Direction
  • IP, RS-232 & IR Control
    Audio Embedders & De-Embedders
  • Dante Ch: 8x0
  • AES67 Enabled
ZW-B202正
  • ZenWin

ZW-B202

Feature
  • 2 × 2, 2-wire/MIC input and 2-wire output
  • Support adjusting the gain per input from 0 to+48dB
  • Supports 44.1k or 48k audio sampling rates
  • 48V power supply for MIC input
  • Control through Web UI and monolithic controller
  • Supports PoE power supply (IEEE802.3af)
    Audio Embedders & De-Embedders
  • Dante Ch: 2x2
  • 44.1kHz-48kHz
atterotech-unHX2D_1200px
  • Attero Tech by Q-SYS

Attero Tech by Q-SYS – unHX2D

The unHX2D is a DanteTM enabled HDMI de-embedder/embedder designed to bridge 2-channel PCM HDMI audio to/from a Dante audio network. In addition, the unHX2D includes two line level analog inputs and outputs that can be independently bridged to/from a Dante audio network. An adjustable audio delay buffer is included on the Dante output for audio and video lip sync. The unHX2D features flexible audio routing between system input sources and outputs, and facilitates bridging audio from either video sources or monitors to a Dante network. The HDMI output operates as a pass thru repeater of HDMI input video source. The unHX2D also includes installer adjustable EDID management settings via software.
    Audio Embedders & De-Embedders
  • Dante Ch: 2x2
  • 24-bit