Kramer - FC-404NET

Kramer – FC-404NET

Product Information

FC-404Net is a four-input/four-output Dante™ interface with line or microphone level inputs and line level outputs. It connects analog inputs to a digital Dante network or outputs four channels from a Dante network.

Blustream – DA44AU

The DA44AU is a four input / four output Dante® digital audio converter. The DA44AU allows any non-Dante® audio source such as mixing consoles, amplifiers, computers and Blustream Matrix / distribution products to be connected as an audio source within a Dante® network, as well as converting a Dante® signal back to an analogue audio signal. The DA44AU supports both balanced and unbalanced audio as well as microphone line level inputs inc. 48V phantom power. The DA44AU supports AES67 RTP audio transport.

I/O Interfaces

See the product

Glensound

Glensound – DARK88 MKII

The DARK88 MKII is a versatile break in/ out box for sending/ receiving analogue audio to/ from a network utilizing the Dante audio over IP (AoIP) protocol. The DARK88 MKII is a versatile break in/ out box for sending/ receiving analogue audio to/ from a network utilizing the Dante audio over IP (AoIP) protocol. In total there are 8 channels of audio sent from the Dark88 into the network. The Dark88 has 8 off analogue electronically balanced audio inputs on Neutrik XLRs. Simultaneously there are 8 channels of audio being received from the network by the Dark88 and these incoming circuits are provided as outputs from the Dark88 in analogue.

I/O Interfaces

See the product

Shure

Shure – ANI22

The ANI22 device can bring up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control. Available in XLR and block connector. The ANI22 device can bring up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control. Available in XLR and block connector. More flexibility for every kind of application where it is required to get analog audio onto and from a Dante network: The ANI22 Audio Network Interface complements the existing ANI4IN and ANI4OUT products, and is available with XLR and block connectors. It brings up to two line / mic signals onto or from a Dante network for easy audio routing and convenient browser-based remote control.

I/O Interfaces

See the product

Kramer – FC-404NET

Product Information

Similar Products

Blustream – DA44AU

Glensound – DARK88 MKII

Shure – ANI22

Stay connected to Dante

Support

Company

Dante Networking Alliance