Cart
← Back to Product Catalog

JBL Synthesis – SDA-2200

Amplifiers

More details

Similar Products

duran-audio-industryamp-PB-800-dn|duran-audio-industryamp-PB-800-dn
  • Duran Audio

Duran Audio – IndustryAmp PB-800-DN

The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems.  The PB-800-DN Industry amplifier is an ultra-reliable, high-power, 8 channel (100W per channel) audio power amplifier designed for use in critical systems. It is designed to drive 100 V line loudspeaker systems and is equipped with on-board DSP allowing gain, EQ, delay and other parameters to be controlled from a remote location using WinControl software, via DANTE™. The amplifiers are fully monitored, with automatic fault detection and reporting. Inputs may be either balanced analogue audio or digital audio DANTE™. When used in conjunction with Duran Audio’s OpSTImizer® service the PB amplifiers can provide significant improvements in speech intelligibility within a tunnel.
    Amplifiers
See the product
KE_Audio_-_KE1000B_0|KE_Audio_-_KE1000B_0
  • KE Audio

KE Audio – KE1600A

“KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging KE1600A is a two channel intelligent power amplifier. “KE” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high performance A/D, D/A converter. Each channel has 5 parametric equalizer, all parameters are adjustable. Multiple frequency division mode, 6db, 12db, 24db or 48db NingKe. Each channel has its own latency, maximum 80 ms and 0.1 ms delay interval. Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise gate. 30 users memory, intuitive and friendly computer interface, RJ45 interface, Channel Copy function, convenient debugging “KE” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core uses cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and uses high power tube as the full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load.
    Amplifiers
See the product
aurora-dtx-amp1|aurora-dtx-amp1
  • Aurora Multimedia

Aurora Multimedia – DTX-AMP1

The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The DTX-AMP1 is the world’s first PoE++ 2x35 watt Dante ® amplifier to integrate IP control and audio DSP functionality. The audio DSP allows parametric equalization, noise reduction, mixing, volume control, audio ducking, and more. The IP control allows for any 3 rd party control system to use the DTX-AMP1 RS- 232, IR, Digital I/O, and relays as a IP port expander.  Aurora’s DTX-AMP1 also has a variety of audio inputs and outputs with two balanced L/R line inputs, one of which can be selected as 2 independent L/R unbalanced inputs, L/R balanced line output, S/PDIF, and L/R amplifier output. The amplifier will operate at full power with external power supply of 70W total. Depending on PoE class type connected, the DTX-AMP1 can supply up to 60W of total power
    Amplifiers
See the product