Cart
← Back to Product Catalog

Innosonix – MA16/D²

Amplifiers

More details

Similar Products

CMX - Power amplifier with DSP & Dante
  • CMX

CMX – DSP-4240

The CMX DSP-4240 is a power amplifier with DSP and Dante.

  • 4 x 60W power amplifier
  • 100V, 70V, 4 Ohm & 8 Ohm output with selectors
  • Built-in DSP with EQ, gain control, crossover, delay, limiter, high-pass filter & low-cut filter
  • Dante network control with 4 In 4 Out matrix
  • Two Ethernet RJ-45 network connector for both Dante and DSP configure
  • Remote GPIO for failure outputs
  • 1U height 19” rack mount type power amplifier
  • Balanced line input by phoenix connector for four channels.
  • Each four inputs with separate gain control.
  • Separate four channel indicators for protection, clip, input and output.
  • Complete short circuit, overload, high temp, clip and DC protection.
  • Dante increases connectivity flexibility, and provides the freedom to use the amplifier power away from the source, wherever it is needed. It also enables the models to allow mixed inputs using either digital or onboard analog audio connections
    Amplifiers
See the product
MA15075D
  • Alfatron

ALF-MA15075D

The ALF-MA15075D is a compact digital mixing amplifier designed for low or high impedance applications. The mode selector switch allows it to deliver either two channels of 75 watts per channel into 4 or 8 Ω, or a single channel of 150 watts at 70 or 100 V. The use of a Class-D amplifier provides power efficiency and energy-saving. In addition to the amplified speaker output, a line level audio output allows the mixed audio signals to be sent to an additional amplifier or other audio system. Feature:
  •  Inputs: 2 x Dante audio, 1 x optical audio, Stereo balanced analog input, 2 x balanced microphone inputs
  • Outputs: 1 x balanced line level outputs, Stereo Low Impedance amp out, 1 x 70V/100V amplifier output
  • Selectable low or high-impedance operation.
  • 2 x 75 watts @ 4 or 8 Ω.
  • 1 x 150 watts @ 70 or 100 V.
  • Class-D amplifier design.
  • Automatic standby after a period of inactivity to minimize power consumption.
  • Rear panel input level controls for setting Microphones input gain.
  •  Low inrush current to prevent audible “thumps” when multiple amps are powered on simultaneously.
  • Balanced analog audio output for pass-through to an additional amplifier or audio system.
  • Basic integrated DSP functions including five-band Graphic equalizer.
  • GUI Webserver with TCP/IP control for remote control or third-party integration.
  • Trigger port for external mute/ unmute trigger.
  • Front panel signal status LEDs for power, panel button lock, audio source, mute, and real-time volume level.
  • 1U Size
    Amplifiers
  • Dante Ch: 2x0
See the product
revolution-acoustics-revnet-2140-d
  • Revolution Acoustics

Revolution Acoustics – RevNet 2140-D

The “Swiss Army Knife” of small amplifiers, the RevNet™ 2140-D gives you the power, versatility and quality you need for both commercial and high-end residential installations The “Swiss Army Knife” of small amplifiers, the RevNet™ 2140-D gives you the power, versatility and quality you need for both commercial and high-end residential installations. One RevNet amp will power two speakers. Units may be daisy-chained for larger applications, and the RevNet 2140-D has the added power of full Dante® compatibility with AES67 support. Quality Loads of headroom with 26 dB gain, coupled with the lowest distortion you’ll find on any comparable pro audio amp. Audiophile-quality RevNet amps are suitable for both pro audio and high-end HiFi operation. Powerful 140 watts per channel (280 W in mono) will power nearly any installed speaker in the room. RevNet amps can be used in 4/8/16 Ohm or 70/100V installations Easy to Install Fast-wiring Phoenix connectors allow you to quickly pre-wire sources and then just plug them into the amp. Versatile Control Direct RVC connections along with USB, TCP/IP, WiFi or Dante make it easy to manage your audio sources and volume. Onboard DSP for Easy Configuration A built-in sound masking generator allows you to quickly configure the amp for corporate uses, while 31 band EQ and RMS compressor bring you complete control over the sound of the room. Specifications
  • 2 x 140W@16/8/4 , 100V/70V @280W
  • Phoenix connectors for Inputs/Link Output, Amp Out and RVC
  • Dante® (with AES67 support) and USB interfaces along with Integrated WiFi for remote control and set up
  • Built-in sound masking generator
  • 31 band fully customizable DSP
  • In-Room AutoEQ and mobile app support
    Amplifiers
See the product