Cart
← Back to Product Catalog

Extron – NetPA U 1002-100V

Amplifiers

More details

Similar Products

revolution-acoustics-revnet-2140-d
  • Revolution Acoustics

Revolution Acoustics – RevNet 2140-D

The “Swiss Army Knife” of small amplifiers, the RevNet™ 2140-D gives you the power, versatility and quality you need for both commercial and high-end residential installations The “Swiss Army Knife” of small amplifiers, the RevNet™ 2140-D gives you the power, versatility and quality you need for both commercial and high-end residential installations. One RevNet amp will power two speakers. Units may be daisy-chained for larger applications, and the RevNet 2140-D has the added power of full Dante® compatibility with AES67 support. Quality Loads of headroom with 26 dB gain, coupled with the lowest distortion you’ll find on any comparable pro audio amp. Audiophile-quality RevNet amps are suitable for both pro audio and high-end HiFi operation. Powerful 140 watts per channel (280 W in mono) will power nearly any installed speaker in the room. RevNet amps can be used in 4/8/16 Ohm or 70/100V installations Easy to Install Fast-wiring Phoenix connectors allow you to quickly pre-wire sources and then just plug them into the amp. Versatile Control Direct RVC connections along with USB, TCP/IP, WiFi or Dante make it easy to manage your audio sources and volume. Onboard DSP for Easy Configuration A built-in sound masking generator allows you to quickly configure the amp for corporate uses, while 31 band EQ and RMS compressor bring you complete control over the sound of the room. Specifications
  • 2 x 140W@16/8/4 , 100V/70V @280W
  • Phoenix connectors for Inputs/Link Output, Amp Out and RVC
  • Dante® (with AES67 support) and USB interfaces along with Integrated WiFi for remote control and set up
  • Built-in sound masking generator
  • 31 band fully customizable DSP
  • In-Room AutoEQ and mobile app support
    Amplifiers
See the product
  • Apex Audio

CloudPower CP704D

CloudPower 4-channel Class-D amplifier is built for easy remote control and monitoring using the IntelliCloud WebUI, reducing site visits.  It features fully integrated DSP and GlidePath architecture for ultra-low distortion, along with True Cone Excursion to extend speaker life. The ‘D’ models include 4×4 Dante integration, and it supports both low impedance and 70/100v speakers. Designed for networked or standalone setups, it also includes a high-visibility OLED display, ultra-quiet airflow management, and operates with high efficiency and low idle power in a slimline 1U chassis with a universal power supply and PFC.  
    Amplifiers
  • Dante Ch: 4x0
  • 24-bit
See the product
redx-sapphire-III-base|redx-sapphire-III-base
  • Redx

Redx – Sapphire III BASE

The Sapphire III is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. Sapphire III BASE is a four-channel audio power amplifier that provides 250W (4 ohms) output power per channel. It can also use bridge mode to provide 500W (8 ohm) two-channel output. Unlike Sapphire II, it adds the latest digital audio processing technology and support for Dante digital network audio transmission technology. It uses the latest SSA Technology and digital audio transmission and processing technologies to create:
  • PSM phase modulation technology, zero crossover distortion
  • Single-stage power conversion is equivalent to the direct use of AC mains power, which is one level lower than traditional class D power amplifiers.
  • Two-way energy recovery system to improve power conversion efficiency and effectively reduce the speaker coil voice temperature
  • ZVS, ZCS Soft Switch Technology, Significantly Reduces Switch Heat, Further Improves Conversion Efficiency
  • Overall efficiency up to 90% ultra high
In the past 100 years, the audio power amplifier topology has undergone Class-A, Class-AB, Class-D, etc., but it has always been a compromise between efficiency and sound quality. To date, SSA Technology has achieved Sapphire III BASE to Class-A sound quality levels with 90% overall system efficiency with its advanced and precise audio modulation technology, single stage power conversion, bidirectional energy recovery and soft switching technology. Really achieved "high efficiency and good voice!" Sapphire III BASE uses the latest digital audio processing and transmission technology, and targeted optimizations have been made. The efficient, reliable, and optimized application design, combined with its Class-A sound quality level, make it widely used in fixed installation systems.
    Amplifiers
See the product