DZR315-D/DZR315-DW


More details

Similar Products

hs-28_400px
  • VUE Audiotechnik

VUE Audiotechnik – hs-28

Achieving a better balance of output and musicality starts by focusing on those frequencies that matter most — the critical “sweet spot” between 35 and 80 Hz. After all, a properly designed full-range speaker should be more than capable of operating effectively down to 80 Hz. Most manufacturers design subwoofers that move as much air as possible in order to achieve maximum output. At VUE Audiotechnik, our designers believe that a high-performance subwoofer shouldn’t sacrifice definition in favor of SPL alone. Achieving a better balance of output and musicality starts by focusing on those frequencies that matter most — the critical “sweet spot” between 35 and 80 Hz. After all, a properly designed full-range speaker should be more than capable of operating effectively down to 80 Hz. In the hm-28, dual spider long-excursion woofers feature large, 4-inch voice coils for increased power handling and reduced power compression. Each 18” woofer has a dedicated amplifier and power supply good for total of 4,000 W of power.  Active onboard electronics include system-optimized amplification and DSP for each driver and cabinet combination. 
    Speakers
Aimline_ALSub8A-Dante
  • Aimline

Aimline – ALSUB8A DANTE

ALSUB 8A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 8” chassis. ALSUB 8A is a powerful subwoofer with integrated 4 x 500 Watt digital amplifier, DSP with flexible input routing and a high efficient 8” chassis. Main features
  • DANTE®-in- and out
  • 8”-chassis
  • Strong SPL
  • Analogue and AES/EBU inputs
  • 10 Band parametric EQ with IIR filter
  • FIR filter import
  • Networking over IP-protocol
  • 24 internal presets
  • Preset switch with UDP commands
    Speakers
soundtube-rs82ez
  • SoundTube

SoundTube – IPD-RS82-EZ

The IPD-RS82-EZ is an 8" open-ceiling speaker. The IPD-RS82-EZ is an 8" open-ceiling speaker. Dante®-addressable coaxial pendant speaker incorporates ne 203 mm (8.0 in.) coaxial driver with BroadBeam Ring™ technology for consistently smooth high frequency. Low latency digital audio, power, and control are delivered to the speaker via standard category cable; connection is made on the other end to the STNet-Switch or other PoE / PoE+ switch. May also be powered via a 24V DC barrel connector for non-PoE installations. Configuration and zoning of the speaker are accomplished via software. Includes hanging hardware with galvanized steel cables and hanging bracket for fast, easy and secure installation. Unit may be hung or mounted direct-to-conduit via locking cover plate. 
    Speakers