Cart
← Back to Product Catalog

Dynacord – TGX10

Amplifiers

More details

Similar Products

ashly-nXe-1.54_600px|ashly-nXe-1.54_600px
  • Ashly Audio

Ashly – nXe1.54bd

The nXe1.54bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x0
See the product
NetPA 204 POE
  • Extron Electronics

Netpa 204 POE

  • Four Channel PoE Amplifier with Dante and DSP
  • Up to 20 watts rms output power per channel
  • Integrated DSP with 4x4 mix matrix
  • DDM and AES67 Support
  • PoE operation with scalable output power
    Amplifiers
  • Dante Ch: 4x0
  • AES67 Enabled
See the product
210706-ma32lp2-persp1-7k_cut_low
  • Innosonix

Innosonix – MA32/LP²

The intention behind the Maxx series, which includes the LP², D² and HP² range, is to improve the total cost of ownership when it comes to a multi-channel solution. By offering the highest channel count per rack space in a single unit available on the market—complete with a comprehensive built-in DSP package—we believe we have achieved this intended goal.

Offering various audio-over-IP protocols, including Dante, combined with our industry-leading DSP capabilities (featuring 2048 taps of IIR/FIR filters, 32 points of parametric EQ, and precise delay and limiting per channel) provides integrators with the tools necessary to deliver a large loudspeaker solution with minimal sonic compromise.
The creative flexibility and improved cost performance of the Maxx series make these products extremely powerful tools.

MA32/LP² delivers 32×50W @4 Ω in only 1U of rack space.

    Amplifiers
  • Dante Ch: 32x0
  • AES67 Enabled
See the product