Cart
← Back to Product Catalog

DSPPA – DT4100E

Speakers

More details

Similar Products

fohhn-DLI-130_1200px|fohhn-DLI-130_1200px
  • Fohhn

Fohhn – Linea Focus DLI-130 DAN

The active, electronically inclinable DLI-130 DAN line source speaker enables intelligent and target-oriented sound coverage in venues that have the most difficult acoustic conditions. Using intuitive software, both the vertical dispersion characteristics and the inclination angle of the loudspeaker beam can be precisely adjusted – in real time – to perfectly suit to the room’s acoustic situation. The Linea Focus DLI-130 DAN is a high performance line source system, which can be electronically controlled and monitored. The system is equipped with eight state-of-the-art Class D amplifiers and DSP technology specially developed for this area of application, plus eight coated 4” long excursion drivers. This perfect balance of amplifier-, digital signal processor- and loudspeaker technology enables a maximum SPL of 124 dB to be achieved. The DLI-130 DAN comes with a digital input interface for DANTE. The loudspeaker’s vertical beam dispersion characteristics can be intuitively controlled – in real time – using FOHHN AUDIO SOFT: The vertical beam width, ranging from 0° to 90°, and vertical inclination angle, ranging from -40° to +40°, can both be adjusted in precise 0.1° increments. This means that unwanted reflections from floors and ceilings can be avoided. The result: optimum levels of speech intelligibility, a pleasing sound image and excellent sound quality – even in the most challenging acoustic conditions.
    Speakers
See the product
ALPoE4.1_frei
  • Aimline

AIMLINE – AL4.1PoE

The AIMLINE AL 4.1PoE column speaker is powered by a POE+ network amplifier with two channel Dante input. No external power supply is required.Thanks to the use of a high efficiently power supply this amplifier is rated with 30 Watts RMS / 60 Watts peak (using a PoE+switch). The enclosure is equipped with 4 x 3,5” speaker and 1” HF driver in a biamped system.The internal powerful 96 kHz DSP gives access to gain, delay, 10-Bd EQ with IIR filter and 24 internal presets. The PANC software controls the DSP in an IP network. This system will solve the issue of having to provide a separate amplifier or I/O interfaces for speaker installations using just a single CAT cable over long distances. This assembly can be used in wide range of projects in multi zones for speech and background music applications.

    Speakers
See the product
CA-412DA
  • DMIX

DMIX – CA-412DA

Technical parameters：

Speaker model: CA-412DA

Speaker type: Active Speaker

Unit composition: 12×4" Full frequency unit

Frequency response: 90Hz-17kHz （-10dB）

Sensitivity: 98dB

Rated impedance: 6Ω

Sound pressure level: 130dB（peak）

Rated power: 360W

Horizontal coverage Angle: 100°x30°-40°，Electronic control

    Speakers
See the product