Product Information
The Dlogixs DNA-7172 is a network amplifier for use with Dlogixs’ line of Dante enabled products.
Similar Products
- Linea Research
Linea Research – 44C06-Dante
The Linea Research 44C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt.
The Linea Research 44C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt.
Linea research 44C Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.
- Amplifiers
- Dante Ch: 4x4
- AES67 Enabled
- Lake People
G103-D-4
Lake People Phone-Amp G103D4 is a headphone amplifier intended for DANTE networks.
The G103D4 model comes with a DANTE 4/4 input and two independent stereo amplifiers. 24 Bit / 192 kHz D/A converters with a Signal-to-noise ratio >105 dB and THD+N as low as 0,002 % are driving the powerful headphone amplifiers. These are best suited to drive any headphones from low to high impedance and with low or high sensitivity. To adapt the amp to demanding headphones, to further reduce the noise level or to maximize the travel of the volume control, the gain is internally adaptable by Dip-Switches to optimize the amp;
The DANTE digital audio signals are input via a standard RJ45 connector. Lake People G103D4 will accept 4 audio channels. The unpacked audio signals are input to two high quality D/A converters. The recovered analogue signals are buffered, attenuated in the analogue domain and then sent to powerful headphone amplifiers. If required, additional gain of +6 dB or +12 dB can be set by Dip-Switches inside the amp. Each amp section offers a 1/4” and 3.5 mm phone jack which may be used simultaneously.
Power supply for the amp is accomplished either by PoE (Power-over-Ethernet) or by a USB wall plug adaptor (not supplied) with USB-B or USB-C connector. The case, front and back panel of G103D4 is made of rugged black anodized aluminum, the lettering is laser engraved. The volume knobs are also made of solid aluminum.
- Amplifiers
- Dante Ch: 4x0
- 24-bit
- Crown Audio
CTD-2125
Crown ComTech D Series amplifiers are designed for versatility, flexibility, and ease of installation. With both Dante inputs and outputs, built-in DSP, power sharing, Lo-Z/Hi-Z switching, and a simple to use web configuration interface, ComTech D amplifiers are ideal for meeting the changing demands of diverse installed audio applications.
The CTD-2125 delivers 125 watts per channel of legendary Crown amplification when all channels are driven equally. Asymmetrical power sharing enables the two channels to share the full 250W in any ratio, offering unparalleled flexibility.
Built-in DSP allows outputs to be tuned specifically for every application and provides the ability to create custom speaker tunings. Factory JBL SpeakerTunings for select JBL models, including Control 400 Series ceiling speakers, are included to simplify the optimization of an all-HARMAN solution.
The amplifier can be configured through the intuitive web interface with any computer or tablet and without the need to install proprietary software. It uses HARMAN's HControl protocol to communicate natively with BSS OMNI Processors or AMX MUSE Automation Controllers and includes an easy-to-use API for integration with 3rd-party control systems.
This compact 1RU, ½ rack width device can be installed in a rack, under a table, or on a wall using the included mounting hardware.
- Amplifiers
- Dante Ch: 16x16
- 24-bit