Cart
← Back to Product Catalog

Devialet – Phantom Reactor Custom

Speakers

Similar Products

SLB118a
  • DMIX

DMIX – SLB118a

The SLB 118A has a built-in power amplifier with a high-performance digital signal processing system, two full-frequency channel drive systems with two or three SLA 110 single 10-inch line array speakers (preferably two), and one channel drive the SLB 118A. Two balanced line input and one signal output ports, plus one power input and output ports, fully meet the use requirements, but also convenient system expansion. With high performance DSP digital audio signal processor, various scene parameters can be set according to different application requirements and different number of speakers. Through the control software setting and quick key selection, greatly simplifies the system construction process, full frequency channel and ultra low frequency channel can be adjusted independently, can achieve the best effect in a very short time. The SLB 118A uses an efficient class D power amplifier module with a patented L-shaped heat dissipation design combined with an integrated cast aluminum back plate for heat dissipation, resulting in high energy conversion efficiency of up to 2X700W+1800W, compact size and stable performance.

Rich accessory package, including adjustable height support rod, speaker cable, power cord, convenient system quick connection.

    Speakers
See the product
23182554792943
  • EAJAX

EAJAX – QC-2.3DP

Dante数字音频传输技术，无压缩、无损耗、极低延时；以网络IP化架构设计，实现网络化、数字化，具有传输距离远、无干扰及低损耗等特点；集网络传输、纯数字功放的全频音箱。以太网供电和音频数据传输整合，实现线缆布局简单化，且符合以太网工程规范；具有高效率高声能输出、出色的音质、完善的保护功能和良好的电磁兼容特性；自带DSP网络有源音箱可在PC端远程对有源音箱的EQ、喇叭两端电压、电流进行监测控制；具有完善的保护功能（短路保护、过流保护、过欠保护、直流保护、功率压限、温度压限、长期输出功率限制、削波限幅器；免去了AP插座和适配器，使工作环境更安全整洁；设备移动方便，可移到任何有局限网线的地方可使用；以网络IP化架构设计具有高扩展性和音频组网能力。

    Speakers
See the product
SpikSub
  • FRENETIK

FRENETIK – Spik Sub

Compact amplified subwoofer, Dante™ processed, PoE+ • Latest generation 60 W class D amplifier board with integrated DSP • Omnidirectional • Wooden cabinet - Euroblock connector for use with external amplification • Base plate for coupling with SPIK 6 (with SMP tube) • Remote control of volume, bass, treble via FRENETIK Adjust software • Board temperature monitoring • No logo on front panel

Technical data:
Type: Amplified Sub, Dante™ PoE+
Power (passive mode): 150 W (8 ohms)
Amplification: 60 W (class D)
Dante™ Receiver: 1 (16 / 24 / 32 bit - 44.1 à 96 kHz)
Transducers: 1 x 8" woofer
Peak SPL capacity (1 m): 119 dB
Bandwidth (-10 dB): 40 Hz - 100 Hz
Input connectors: 1 x RJ45 (Dante™ active mode) + 1 Euroblock (passive mode)
Top plate : for SMP tube
Insert : no
Power supply: PoE+ (IEEE 802.3 at)
Dimensions: 330 x 290 x 400 mm
Weight: 12.00 kg

    Speakers
See the product