Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking (optional).
RAM Audio® introduces this new generation of professional touring amplifiers based on the field proven QuantaPulse™ Technology: V Series / W Series (with only aesthetic differences).
These new devices feature two or four channel models, ready for rough handling in the touring world. For this purpose, V/W Series amps implement oversized high efficiency regulated power supply with PFC front end to deliver their full performances independently of mains status.
This together with oversized high efficiency audio power stage, forced front to back cooling through a component-free path with removable front panel dust filters, improved rugged mechanical design with even weight distribution, full digital control from LCD display on the front panel… Resulting in: just power, reliability and robustness for your touring gigs!
V6000 Specifications:
| Power table | V6000 |
| 2 ohm | 2x3025W |
| 4 ohm | 2x1600W |
| 8 ohm | 2x820W |
| Bridge 4 ohm | 1x6050W |
| Bridge 8 ohm | 1x3200W |
| V6000 | |
| Frequency Response (power bandwidth ±0.25dB) | 20Hz – 20kHz |
| Phase Response (@1W 20Hz-20kHz) | ±15 deg |
| Total Harmonic Distortion (20Hz-20kHz) | <0.05% |
| Intermodulation Distortion (SMPTE) | <0.05% |
| Damping Factor (@8ohm) | >500 |
| Crosstalk (20Hz-1kHz) | >80dB |
| Voltage Gain | 26 dB to 38 dB (0.5 dB steps) |
| Sensitivity (rated power 26/32/38dB Gain) | 4.0/2.0/1.1V |
| Signal to noise Ratio (20Hz-20kHz) | 113dB |
| Required AC Mains | Operating Voltage (50Hz-60Hz) |
| Power On Idling (@230V) | 0.5A |
| 1/8 rated power (@230V min. Z) | 7A |
| Dimensions (WxHxD) | 483×88.9x460mm – 19×3.5×18.1inches |
| Weight (Net) | 10kg – 22.1lb |
Single-channel Class-D amplifier with 120 W power output. Created for 100 V and low impedance high-quality background music systems. Containing Dante digital input card, Balanced Phoenix & Stereo RCA input and audio link output connectors. Amplifiers have an RS232 control port for integration amplifiers with third-party automation systems that allow using iAC amplifiers in large and complex audio systems that can be automated and controlled remotely. Due to the integrated signal processor, amplifier‘s volume level, tone control, mute, and standby status can be controlled with a rotary selector as well as by RS232 protocol.
