Cart
← Back to Product Catalog

DConXo

I/O Interfaces

More Details

Similar Products

mansionDIC1R13A
  • Mansion

Mansion – DIC1R13A

DIC1R13A is a high quality Dante interface box for converting two Dante channels to CSP products, and two analogue audio input channels from CSP products to Dante network. Features: * Convert CSP B and C signals to Dante network * Convert 2-channel Dante signals to B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 143mm x 45mm x 93mm (WHD)
    I/O Interfaces
See the product
extron-axi44at|extron-axi44at
  • Extron Electronics

Extron – AXI 44 AT

The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system.  The Extron AXI 44 AT is a quarter rack width audio interface for integrating four mic/line sources onto a Dante™-enabled audio system. It features four mic or line inputs on 3.5 mm captive screw connectors, with switchable 48 volt phantom power. Input select, gain, and phantom power settings are controllable from the front panel, via DSP Configurator Software, or by SIS command. The AXI 44 AT also features four line level outputs for routing any four Dante channels from the network to the audio system. The AXI 44 AT interfaces with any Dante-equipped audio processor, and can be powered via PoE.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
See the product
mansionDIC2R43A
  • Mansion

Mansion – DIC2R43A

DIC2R43A is a high quality Dante interface box for converting three Dante channels to CSP products, and an additional analogue output. An analogue input channel and  three CSP product input channels to Dante network. Features: * Convert CSP A, B and C signals to Dante network * Convert 3-channel Dante signals to A, B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Switchable Line / Microphone / 48V phantom power for auxiliary input * Provide high quality preamplifier for microphone *Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 146mm x 41.6mm x 96.9mm (WHD)
    I/O Interfaces
See the product