DAD – Core 256


More details

Similar Products

amphenol-amphe-dante-RJD1112-0500_600px|amphenol-amphe-dante-RJD1112-0500_600px
  • Amphenol

Amphenol – Amphe-Dante RJD1112-0050

Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante are Dante® audio to analogue audio adapters, with one RJ45 Dante input, and one AX series XLR analogue outputs in a molded housing. Amphe-Dante products enable simple connection of analogue equipment to a Dante network and can receive audio channels from a Dante network and provide studio-quality, low-latency audio via an XLR connector to analogue audio equipment. Any audio available on the Dante network can be routed via the XLR outputs to an amplifier, powered speaker, mixing console, digital signal processor (DSP), or other analogue audio device.
    I/O Interfaces
Yamaha - SWR2310
  • Yamaha

Yamaha – SWR2310 Series

The Yamaha SWR switch lineup, featuring high-performance L2 switches for fixed installations, has been expanded to provide a wider range of models for a wider range of applications.

In addition to VLAN functionality, the new SWR2310-28GT and SWR2310-18GT offer high port counts and features such as 10G uplink ports for long-distance transmission of multichannel 96 kHz data, making them ideal choices for safe, stable backbone operation in large-scale systems. As with other SWR/SWP switches, Yamaha LAN Monitor software provides clear visual system status monitoring that makes Dante system setup easy.

Models:

  • SWR2310-28GT
  • SWR2310-18GT
  • SWR2310-10G

    I/O Interfaces
ru-lb2_400px
  • RDL

RDL – RU-LB2

The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio channels to balanced line level. Input gain trimmers and LED audio level indicators are provided. Model RU-LB2P operates from PoE. The RU-LB2 is a high quality line-level bi-directional Dante network interface. The RU-LB2 converts two line-level audio sources to Dante network channels, and two Dante network audio signals to balanced line level. The line level inputs accept unbalanced or balanced signals. Line-level outputs are balanced. The front panel features signal LEDs that indicate audio presence for each of the received network signal channels and a gain trimmer with an associated Dual-LED VU meter for each audio input. Balanced +4 dBu audio levels correspond to a network digital audio level of -18 dBFS. The noise floor is better than 80 dB below operating level. The RU-LB2 is also available in a PoE version (RU-LB2P). If PoE power and an external 24 Vdc supply are both feeding an RU-LB2P, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply.
    I/O Interfaces