Cart
← Back to Product Catalog

Crown Audio – Dci 4|1250DA

Amplifiers

More details

Similar Products

Blaze by Sonance - PowerZone Connect 2004d
  • Blaze by Sonance

PowerZone™ Connect 2004D

The PowerZone™ Connect 2U series is a line of ultra-reliable, full-matrix DSP-enabled Class-D amplifiers that delivers exceptional system configuration and flexible output, with a total system power ranging from 1000 W to 6000 W.
    Amplifiers
See the product
rdl-av-nh1|rdl-av-nh1
  • RDL

RDL – AV-NH1

The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment.  The AV-NH1 is a headphone amplifier that converts two Dante network audio channels to a stereo headphone output with front-panel level adjustment. The outputs connects through a stereo 3.5 mm Mini-jack. Each channel provides 100 mW into 100 ohms for a network digital audio level of 0 dBFS. Special software is not required to configure the module. The AV-NH1 is a professional grade product for studio quality fidelity and low noise performance. The AV-NH1 may be powered from an external 24 Vdc power supply, available separately. The AV-NH1 is equipped to operate from a PoE enabled network switch. The AV-NH1 will reserve power from the switch even while being powered from an external 24 Vdc supply. If PoE power and an external 24 Vdc supply are both feeding an AV-NH1, the unit will run from the external supply and will seamlessly switch over to PoE power upon loss of the external supply. Valid power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit. The AV-NH1 is constructed in a durable, professional all-metal enclosure suitable for use on stage or in studio, or mounted to any flat surface. For fixed installations, mounting brackets are included. This full-featured AV-PAK product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. Features
  • Converts Two Dante Network Audio Signals to a Stereo Headphone
  • Output on Professional Quality 3.5 mm stereo MINI Jack
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Front-Panel Output Level Control
  • Special Software Not Required for Module Setup
  • Exceptional Low-Noise and Low-Distortion Performance
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af) or external 24 Vdc
  • Mounts on a Microphone Stand using an RDL SF-MSM1
    Amplifiers
See the product
NPA43_D4
  • Kingray

Kingray – NPA43_D4

NPA43-D4 is a 4*300W8Ω class-D amplifier, which configures with 4-channel Dante input interface and DSP processing solution such as compressor, limiter, noise gate, parameter equalization, matrix routing, delay, etc. Suitable for various scene with demands of sound reinforcement system. The whole series of products are equipped with TCP/IP communication interface, mobile phone App control, GPIO extension control and Mconsole unified management.

◆ Optional 4-channel Dante network audio input  

◆ Support Mconsole and app TCON network control 

◆ IPS color LCD

◆ Built in DSP digital processor

◆ Multiple control modes are supported: USB、TCP/IP、RS232、RS485

◆ Monitor the working state of power amplifier

◆ Call and standby the amplifier by remote

◆ Support balanced XLR input and unbalanced RCA input

◆ Support stereo, bridge, mono, matrix mode,switch by software

◆ Input sensitivity 0dBU / 6dbu setting by software or LCD

◆ Power on state: Power On/Standby

◆ Constant Pressure and Resistance support:100V、70V、8Ω、4Ω

    Amplifiers
See the product