Crest Audio – CKd 1204


More details

Similar Products

pema-8250-front|pema-8250-front
  • Ashly Audio

Ashly – pema8250d

Ashly's Pema™ is an energy efficient, Class-D amplifier topology with a switching power supply and full matrix mixer, translates to 80% energy efficient out of the box. The pema8250 is a 8-Channel @ 250 Watts per channel and ships with Ashly’s full Protea™ suite of DSP.

The pema8250 is also available in these models:

pema 8250.25d - pema Network Power Amp 8 x 250W @ 25V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.70d - pema Network Power Amp 8 x 250W @ 70V with 8x8 Protea DSP. Includes OPDante Card

pema 8250.10d - pema Network Power Amp 8 x 250W @ 100V with 8x8 Protea DSP. Includes OPDante Card

    Amplifiers
  • Dante Ch: 8x8
  • 24-bit
ashly-nXp-4002_600px|ashly-nXp-4002_600px
  • Ashly Audio

Ashly – nXp4002d

The nXp4002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x4
  • 48kHz-96kHz
Powersoft-T602_front_big
  • Powersoft

Powersoft – T602

The T Series is a very flexible and cost effective amplifier platform loudspeaker processor The T Series is a very flexible and cost effective amplifier platform loudspeaker processor. All models deliver the same high peak voltage allowing high SPL with single 8/16 ohm cabinets on all models. The high voltage is also good for sharing power between the channels for applications such as bi-amped loudspeakers or subwoofers with passive tops. The amplifiers feature input via Dante, AES3 and analog. The Dante and AES3 solutions are optimized for daisy-chained distribution of 2-channel audio for distribution to many amplifiers without the need for external switches/repeaters/ splitters. A simple Dante system has a daisy chain with the mixing console at one end and a WiFi access point at the other end and the amplifiers in-between.
    Amplifiers
  • Dante Ch: 4x4
  • 24-bit