Cart
← Back to Product Catalog

Connect Series 124D

Amplifiers

More Details

Similar Products

ashly-nXp-4002_600px|ashly-nXp-4002_600px
  • Ashly Audio

Ashly – nXp4002d

The nXp4002d is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 400W per channel at Low Z, 70V, and 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors are Neutrik® XLR/TRS combo jack and Euroblock, while output connectors are Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The unit has 32-bit DSP processing at 48kHz or 96kHz sampling rate. DSP functions include swept load impedance, gain, dynamics including autoleveler and ambient noise compensation, equalization including graphic, parametric, feedback suppressor, and FIR filters, a matrix mixer including automixing, crossover, delay, and a signal generator. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x4
  • 48kHz-96kHz
See the product
  • Sonance

2000.2D PowerZone Connect PRO

The PowerZone Connect PRO family brings native 70V/100V amplification and advanced DSP-based zone processing to commercial distributed audio applications, with Audinate Dante networking across all six Dante-enabled models from 300W to 4,000W total power. Each model integrates a DSP and zone processing platform supporting source selection, volume control, priority routing, input mixing, microphone ducking, EQ, filters, delay, and dynamics processing within a single configuration environment. Ships with Sonance loudspeaker presets and 70V/100V-optimized firmware preloaded for faster system setup and deployment. Managed through PowerZone Control Center for macOS, Windows, and web app from a phone, tablet, or computer. Compatible with the Blaze by Sonance Wall-M controllers and third-party platforms including Crestron, RTI, and Q-SYS via open API. Ideal for hospitality, retail, fitness, and restaurant environments. Available in half-rack 1U, full-rack 1U, and full-rack 2U form factors. ErP and ENERGY STAR compliant and backed by Sonance’s 5-year warranty.
    Amplifiers
See the product
Detalle_caratula_Pi-300x163-1
  • RAM Audio

RAM Audio – Pi2-3k

Pi is a multipurpose series of power amps for touring and installation applications, based on the legendary QuantaPulse™ switching mode power supply with an innovative class H 3 steps topology.

This series includes a completely renewed PMS™ which incorporates a set of protection systems in power supply and audio modules which works in real time continuously maintaining all variables of the amp within safe working threshold always. So, Pi amps are appropriate machines for the most exigent applications with the best reliability.

Pi amps have been designed with a non-symmetrical class H topology which allows working with very high voltages given incredible headroom and a great punch.

All these characteristics make Pi amplifier an interesting device to work with asymmetric loads to squeeze every last drop of power in each way of the sound system.

Pi series has an extra-large 4.3″ IPS display with capacitive touch panel whereby it is possible to control and manage every parameter of the amp and select all System Presets, Uses, User EQ and Snapshots created.

Also a powerful FIR DSP has been implemented in these amps with a software specifically developed for this series.

    Amplifiers
  • 24-bit
  • 96kHz
See the product