Cart
← Back to Product Catalog

Catchbox Hub

DSPs (Digital Signal Processors)

More Details

Similar Products
  • Ecler NEEC Audio Barcelona

HALO-4B150

HALO-4B150 is a 4-channel Class D amplifier with networked DSP, delivering 4 × 150 W in low-impedance mode at 4 Ω or 8 Ω. Its four output channels can be bridged to drive high-impedance 70 V or 100 V loudspeaker lines. It features 4 balanced analogue inputs, 4 Dante®/AES67 digital inputs and outputs, 2 balanced auxiliary outputs, and a flexible 4 × 6 digital matrix. Its comprehensive DSP includes input and output parametric equalization, graphic output equalization, crossovers, delay, and configurable peak and RMS limiters. The built-in web application provides intuitive configuration, control and monitoring of the amplifier. Two Ethernet ports with integrated switch functionality allow network daisy-chaining and provide access to control, Dante®/AES67 audio transport and remote management. HALO-4B150 also supports customizable user control panels and integration with EclerCLOUD and the PULSO digital control panel series.
    DSPs (Digital Signal Processors)
  • Dante Ch: 4x4
  • 32-bit
See the product
aeqnetboxdsp
  • AEQ

AEQ – NETBOX DSP

The NETBOX DSP is able to receive audio from the Dante network and then return it, mixed and processed, to be used in another device or subsystem. It can also generate test signals and vumeters. Effectively, it is an audio matrix for AoIP networks. The NETBOX DSP is able to receive audio from the Dante network and then return it, mixed and processed, to be used in another device or subsystem. It can also generate test signals and vumeters. Effectively, it is audio matrix for AoIP networks. NETBOX DSP can be used in combination with any AEQ or third-party device from more than 350 manufacturers which are compatible with Dante AoIP protocol. NETBOX DSP also incorporates 16 GPI and 16 GPO (each GPIO connector includes a power supply pin in order to feed external circuitry). GPIO can also be transported through the IP network between compatible devices. This way, a GPIO can drive the GPOs in different piece of equipment.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • AES67 Enabled
See the product
BLU-326-Reflection
  • BSS

BSS – BLU-326DA

Formerly known as BLU-326 The Soundweb London BLU-326DA offers configurable I/O, Dante / AES67 audio, and a high bandwidth, fault tolerant digital audio bus. The BLU-326DA is configurable through HiQnet™ London Architect. A rich palette of logic objects and a “drag and drop” method of configuration provide a simple and familiar design environment. This processor features Dante / AES67 audio with primary and secondary ports for fault tolerance, with control through a separate Ethernet port. As well, the processor includes support for Dante 4.0 firmware for integration with Dante Domain Manager. The BLU-326DA also features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber optic media converters can be used to increase the distance between devices to over 40km. Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations. Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets) Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect. 12 Control Inputs and 6 Logic Outputs allow the BLU-326DA to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect. The BLU-326DA and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
    DSPs (Digital Signal Processors)
  • Dante Ch: 64x64
  • 24-bit
See the product