Cart
← Back to Product Catalog

BARE – D-64net

DSPs (Digital Signal Processors)

More details

Similar Products

redx-dsp0808D
  • Redx

Redx – DSP 0808D

The Redx series digital audio processor is a freely designed audio processing and control system. It includes advanced DSP processing technology, with new adaptive feedback, echo, and noise cancellation. Full-featured matrix mixing function, because most of the control is through the software, so the appearance is more concise and bright. The Redx series digital audio processor is a freely designed audio processing and control system. It includes advanced DSP processing technology, with new adaptive feedback, echo, and noise cancellation. Full-featured matrix mixing function, because most of the control is through the software, so the appearance is more concise and bright. A generation of network audio processor, integrated with low-delay Dante module, provides 8 input, 8 output, all connected to the network port. The audio input source can be controlled by software to distribute the routing, and can be accessed anywhere in the network, enabling rich algorithm processing, eliminating the need for physical line connections.
  • Supports tablet control and distributed cloud control;
  • DSP audio processing, built-in automatic mixer, optional feedback cancellation, echo cancellation, noise elimination module;
  • Inputs per channel: preamplifier, signal generator, expander, compressor, 5-band parametric equalization;
  • Output per channel: 31-stage graphic equalizer, delayer, frequency divider, limiter;
  • full-featured matrix mixing function;
  • Optional Dante network audio module;
  • Built-in automatic camera tracking function;
  • Support scene preset function;
  • Automatic power-off protection memory function
    DSPs (Digital Signal Processors)
See the product
seikaku-MATRIX-A8-F|seikaku-MATRIX-A8-F
  • Seikaku

Seikaku – Matrix-A8

The application of Matrix System contains both hardware and software, using host Matrix A8 as the control center, the whole function of this system is as below:
  • The basic system offers a total of 12 IN x 12 OUT without the Dante option.
  • I/O expansion is possible with 16pcs devices linked together for a maximum of 192 x IN and 192 x OUT.
  • With remote paging MIC RPM-200, can control paging in different zones.
  • With remote volume control RVA-200 or RVC-1000, can control volume in different zones.
  • Use different data line for audio signal and control signal RIO-200, which can avoid their conflict and increase their reliability.
  •  Transfer audio signal based on AES/EBU transfer protocol, while transfer control signal based on RS-485 transfer protocol.
  • 8 analogue IN / 8 analogue OUT via local ports
  • 4 digital IN / 4 digital OUT via local ports to analog panel I/O
  • 8 digital IN / 8 digital OUT via DANTE optional card
You might also be interested in the Matrix DB. It has the same features as the A8 but with 12 digital IN / 12 digital OUT and no analogue IN or OUT.
    DSPs (Digital Signal Processors)
  • Dante Ch: 8x8
  • 24-bit
See the product
Rane_-_HAL_EXP7x|Rane_-_HAL_EXP7x
  • Rane

Rane – HAL EXP7x

The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. The Rane EXP7x Expander for the HAL1x provides eight channels of full-featured, drag and drop Acoustic Echo Cancellation (AEC). Each channel of AEC can be added to any HAL1x system input and route to any Halogen DSP block, including the gain-sharing automixer, manual mixer, regular Room Combine block, or Conference Room Combine block. Chain up to 32 EXP7x units to a HAL1x for 256 assignable AEC channels. Because EXP7x AEC channels are not associated with a particular hardware input, preset recall can re-assign an AEC resource across inputs / rooms as required. Drag and drop AEC supports the typical one-AEC-per-microphone configuration. With optimum acoustics, mic and loudspeaker placement, or with rarely used mics (such as audience mics) it allows mixing more than one mic into a single AEC channel, significantly reducing cost.
    DSPs (Digital Signal Processors)
  • Dante Ch: 0x0
See the product