BARE – AD-48


More details

Similar Products

xIO-Stage-4x4-3-2000x1000
  • Symetrix

Symetrix – xIO Stage 4×4

Expand Analog I/O Using Dante.  For use with Symetrix Radius, Prism and Edge DSPs, the Symetrix Dante I/O Expanders use Composer for setup. Using Composer eliminates switches, circuit board jumpers, and mechanical adjustments as well as the need for third party software applications.

xIO Stage 4×4

  • Premium 4 IN x 4 OUT Dante digital snake.
  • Neutrik metal body DL series XLR connectors.
  • 14 gauge A1008 steel construction.
    I/O Interfaces
  • Dante Ch: 4x4
  • 24-bit
bose-controlspace_EP22-D_1200px|bose-controlspace_EP22-D_1200px
  • Bose Professional

Bose – ControlSpace EP22-D

The Bose® ControlSpace® EP22-D Dante endpoint is a convenient and cost-effective 2-in/2-out analog audio interface. The small form factor with PoE make it easy to locate close to analog devices, helping to reduce costly and interference-prone analog wiring. The ControlSpace EP22-D Dante endpoint is a 2in/2out, convenient and cost-effective way to add mic/line audio input and output channels to a Dante-based networked audio system. The small form factor of the EP22-D and PoE power capability make it easy to put Dante connectivity wherever it’s needed—near the audio source or sink—thereby eliminating costly and interference-prone analog wiring. Setup and control, including like mic/line input gain, output gain and phantom power, as well as Dante audio routing are all integrated in ControlSpace Designer™ software.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
mansionDIC1R13A
  • Mansion

Mansion – DIC1R13A

DIC1R13A is a high quality Dante interface box for converting two Dante channels to CSP products, and two analogue audio input channels from CSP products to Dante network. Features: * Convert CSP B and C signals to Dante network * Convert 2-channel Dante signals to B and C channels of CSP. * Signal level and limit LED indicator for each input channel on the front panel * Adjustable gain for each input channel on the front panel is -20 dB to + 20 dB * LED indicator for the signal level of each output channel on the front panel. * Power over Ethernet (PoE) or 24VDC power supply * LED indicators show power and network status. * High resolution 24-bit of DAC and ADC *Dimension: 143mm x 45mm x 93mm (WHD)
    I/O Interfaces