AXEL Technology - Falcon X6 Audio Processors

AXEL Technology – Falcon X6 Audio Processors

Product Information

Audio Processing Presets
The right sound for your radio in a few clicks, with 60 presets belonging to 10 families.
INPUTS
Extended Changeover/Silence Detector with configurable priorities out of 11 sources: 1xAnalog, 2xAES/EBU, 2xIP, 2xMPX, 1xAES192, 1xDante (Optional), 1xMPX over Dante (Optional), 1xInternal Player
OUTPUTS
1xAnalog, 2xAES/EBU, 2xIP, 2xMPX, 1xAES192, 1xDante (Optional), 1xMPX over Dante (Optional)
MPX CHANGEOVER
Manages the routing of MPX signals for Advertisement Area Splitting
ADVANCED RDS
Dynamic RDS fully supported, UECP Input implemented, 8 Datasets available. Suitable for network infrastructures
UPGRADEABLE AND RELIABLE
Internal SD card whit OS for Disaster Recovery. Easily Upgradable via WEB or Windows application.
BUILT-IN AUDIO ENCODER AND STREAMER
Manages an audio stream like an input, generates an output audio stream
SAMPLING RATE FROM 32 kHz TO 192 kHz
WEB BASED CONTROL PANEL
Whole system managed through a WEB page generated by the internal Server. Main functions through the physical panel.

Rane – HAL EXP5x

The EXP5x is a 12 Mic/Line/Line-Plus input & DSP expander for the HAL1x. It also supplies four DR ports, useful for adding source selection and/or volume control remote controls. The EXP5x is a 12 Mic/Line/Line-Plus input & DSP expander for the HAL1x. It also supplies four DR ports, useful for adding source selection and/or volume control remote controls. Each of the 12 inputs independently supports either dynamic mic, 48V phantom mic, +4 dBu line-level, or Rane’s Line-Plus input. Line-Plus accepts -10 dBV unbalanced Left/Right Monoed together on the “+” and “–” ports, respectively. For stereo unbalanced sources, Line-Plus allows connecting the stereo RCA left tip conductor to the “+” terminal, the RCA right tip to the “–” terminal, and both RCA shields to the EXP5x Euroblock ground. Select Line-Plus in Halogen and you get a properly monoed audio channel.

DSPs (Digital Signal Processors)

Dante Ch: 0x0

See the product

Symetrix

Symetrix – Radius NX 4×4

Radius NX 4×4 (4 analog inputs, 4 analog outputs) and Radius NX 12×8 (12 analog inputs, 8 analog outputs). Both feature 64×64 redundant Dante and identical DSP resources. The two differ only in analog I/O, logic output, and external control input capacity. The reduced cost of the 4×4 makes it extremely competitive in applications where many Dante endpoints are routed to a primary DSP and fewer analog connections are required.

DSPs (Digital Signal Processors)

Dante Ch: 64x64
16-bit, 24-bit

See the product

NTP Technology – Audio Delay DSP

Penta - Audio Delay Processor
SPQ Card serves different functions for DAD Ax32, Penta 720 and 721s, based on different software:

The programmable delay for up to 128 ch.
Individual delay pr. channel
128 ‘channel-seconds of delay’
128 ch. can be delayed up to 1 sec.
1 ch. Can be delayed up to 128 sec.
Or any combination in-between
Delay can be set in steps of 1 sample
Suitable to achieve lipsync

DSPs (Digital Signal Processors)

AES67 Enabled

See the product

AXEL Technology – Falcon X6 Audio Processors

Product Information

Similar Products

Rane – HAL EXP5x

Symetrix – Radius NX 4×4

NTP Technology – Audio Delay DSP

Stay connected to Dante

Support

Company

Dante Networking Alliance