Cart
← Back to Product Catalog

Aurora Multimedia – DTX-AMP1

Amplifiers

More details

Similar Products

iAC_240_Dante
  • AMC

AMC – iAC240

Single-channel Class-D amplifier with 240 W power output. Created for 100 V and low impedance high-quality background music systems. Containing Dante digital input card, Balanced Phoenix & Stereo RCA input and audio link output connectors. Amplifiers have an RS232 control port for integration amplifiers with third-party automation systems that allow using iAC amplifiers in large and complex audio systems that can be automated and controlled remotely. Due to the integrated signal processor, amplifier‘s volume level, tone control, mute, and standby status can be controlled with a rotary selector as well as by RS232 protocol

    Amplifiers
  • Dante Ch: 2x0
  • 48kHz
See the product
Voltera_D_4800.4
  • Biamp

Voltera – D-4800-4M

Audio DSP and amplified loudspeaker controller; 4 channels sharing 4800W with Dante and AVB. Key Features
  • Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
  • 4 class D channels sharing 4800 watts
  • Power sharing provides up to 75% of total power or 3600 W through any single channel
  • High peak voltage output capability: 237 Vpk
  • Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
  • Each model supports AVB, Dante, and AES67
  • Accurate raised cosine EQ for the entire frequency band
  • Group-controlled raised cosine EQ making it attractive for tuning large systems
  • Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
  • Processor can be sustained through POE – no main power required and no reboots
  • Support for failover-to-analog from networked audio input operation
  • 5-year warranty
  • Compliant with the US Trade Agreement Act (TAA)
  • Biamp Workplace Ready
    Amplifiers
  • 48kHz-96kHz
  • AES67 Enabled
See the product
atlasied-dpa804_1200px|atlasied-dpa804_1200px
  • AtlasIED

AtlasIED – DPA804

The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements. The AtlasIED DPA804 amplifier features a combination of flexibility, performance, and control to provide high value features for applications that require more than just great sound. The network enabled DPA804 is a DSP controlled four-channel amplifier that can be configured in three different amplification arrangements to meet a wide range of installation design requirements.The DPA804 can be used right out of the box in its factory default configuration as a traditional four-channel 70.7V commercial power amplifier requiring no programming, special set-up, or network connectivity.  However, the DPA804 can be configured in four-channel mode with either 4Ω or 8Ω load impedances for two stereo zones. Many system designs require both low and high impedance amplification. The DPA804 can be configured for a 70.7V/100V paging/background system on two channels and the other two channels can be used for 4Ω/8Ω foreground stereo applications.The DPA804 comes standard with four balanced line inputs and an accessory slot for an optional DPA-DAC4 four-channel Dante™ receiver card or a DPA-AMIX (2) mic/line and (2) AUX input card, for a total of eight inputs. All inputs can be mixed and routed to any of the four amplifier channels. All amplifier channels have an assortment of DSP tools including level controls, EQs, limiters, high & low pass filters, and delay to provide flexibility for a range of applications.The output level can be assigned to either the front panel potentiometers or to the onboard GUI. Wired remote level controls can be configured to allow simple control for the end user. Each unit also features GUI based input and output level metering along with assignable mute functions that are triggered via an audio signal or contact closure. Access to the DSP settings is accomplished via computer, tablet, or mobile device using a web browser. All settings can be password protected.
    Amplifiers
  • Dante Ch: 4x0
See the product