Cart
← Back to Product Catalog

AUDAC – PMQ600

Amplifiers

More details

Similar Products

ashly-nXe-1.54_600px|ashly-nXe-1.54_600px
  • Ashly Audio

Ashly – nXe1.54bd

The nXe1.54bd is a 2 channel multi-mode amplifier capable of driving 2 Ohm loads at full power. The maximum rated output power is 1,500W per channel at Low Z and 70V modes, and 1,250W in 100V mode. There is an automatic but defeatable sleep mode consuming <1W, and instant standby mode controlled by contact closure or software. A switch mode power supply auto-detects 120VAC or 240VAC mains, and a Neutrik® powerCON is used for the AC cord. Each channel has selectable output mode of Low Z, 70V, or 100V, an 80Hz high-pass filter, input limiter, and input gain settings of 26dB, 32dB, 38dB, or 1.4V. Each channel has remote DC level control. Input connectors is Neutrik® XLR/TRS combo jack and Euroblock, while output connectors is Neutrik® speakON. The unit has a front panel power switch and level controls that can be disabled. LEDs indicate Protect, Sleep, Disabled, Com, and Bridge mode status, as well as Temperature, Output Current, Output Signal, and Clipping/Mute status per channel. The unit has Ethernet control with a real-time clock for event scheduling. The unit has serial data remote control, aux preamp outputs, preset control, fault condition logic outputs, optional network audio and AES3 digital audio capability. The amplifier has temperature dependent variable speed forced-air cooling.
    Amplifiers
  • Dante Ch: 4x0
See the product
williams-sound-dl_207_net_d
  • Williams AV

Williams Sound – DL210 NET D 2.0

The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency. The Digi-Loop’s amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users. System includes: (1) DL 210 NET D 2.0 Loop Amplifier (1) WLC 004 Line Cord (US) (1) IDP 009 ADA Wall Plaque (t-coil)
    Amplifiers
  • Dante Ch: 2x0
  • 24-bit
See the product
  • Trinnov

Amplitude16

The Trinnov Amplitude16 is a 16-channel Class D power amplifier designed for high-performance home theater, and with the optional Dante® input board it becomes a fully networked amplification solution. This upgrade enables direct AoIP connectivity, allowing the amplifier to receive digital audio streams from processors like the AltitudeCI without any analog conversion. Both products share the same high-performance DAC architecture, ensuring identical conversion quality and seamless sonic consistency, even when the DAC stage is relocated closer to the loudspeakers. With support for bridging channels to deliver higher power where needed, the Amplitude16 offers unmatched flexibility, from driving LCRs to powering multi-subwoofer WaveForming™ arrays. Compact yet powerful, it provides integrators with a streamlined, all-digital signal path that reduces cabling complexity while maintaining audiophile standards. Together with the AltitudeCI, the Amplitude16 Dante® forms the backbone of a complete, scalable, and networked home theater ecosystem
    Amplifiers
  • Dante Ch: 16x0
  • AES67 Enabled
See the product